Bed bolts sizes?

[93 TY 2185]

I lost the bolts for the Syclone bed to attached it to the frame.
Anyone know the size and length?

Thanks,

 

[jharrison]

Re: Bed bolts sizes?

I don't know the size or length, but what I just did was order the set from www.lmctruck.com They have the 8 piece kit part# 29-0010 for 6.95. When I took my bed off I only had six bolts holding the bed, so you can either go back with six or install all eight. Either way 7 buck is pretty cheap.

 

[SY2932]

Re: Bed bolts sizes?

I can check once I get home later tonight...

 

[93 TY 2185]

Re: Bed bolts sizes?

I can check once I get home later tonight...

Cool...Thanks Mike.

 

[V]

Re: Bed bolts sizes?

not 100% sure, but my book says:

M12 x 1.75
85mm length, grade 10.9

 

[SY2932]

Re: Bed bolts sizes?

not 100% sure, but my book says:

M12 x 1.75
85mm length, grade 10.9

Oops, you just bought six bolts that won't fit . They are M10 - 1.50 X 40MM long (1.5 inches). Didn't want to move two cars to get the floor jack under it so I pulled the bolt with the truck on the ground. Stupid lowered truck, should have left it stock...

 

[93 TY 2185]

Re: Bed bolts sizes?

They are M10 - 1.50 X 40MM long (1.5 inches).

Thanks Mike!:tup:

 

[warmpancakes]

Re: Bed bolts sizes?

I might have a spare set wade

 

[V]

Re: Bed bolts sizes?

maybe mine were cab bolts, dunno...thanks for checking

 

[93 TY 2185]

Re: Bed bolts sizes?

I might have a spare set wade

Thanks anyways Ken I went out and bought them today.

 

[warmpancakes]

Re: Bed bolts sizes?

no problem

 

[SY2932]

Re: Bed bolts sizes?

Thanks Mike!:tup:

Nothing to it, easier than falling in love... I dunno if you saw my other post where you mentioned that your brother bought the syclone or not. I should be in the Detroit area sometime in the near future. I could bring up the airbox that I told you about and your block off plate.

 

[93 TY 2185]

Re: Bed bolts sizes?

Nothing to it, easier than falling in love... I dunno if you saw my other post where you mentioned that your brother bought the syclone or not. I should be in the Detroit area sometime in the near future. I could bring up the airbox that I told you about and your block off plate.

I missed that post Mike.
I still have the block available for you.
We should get together when you make it up here.:tup:
I'll PM you my Cell #

 

[warmpancakes]

Re: Bed bolts sizes?

count me in where in detroit?

 

[SY2932]

Re: Bed bolts sizes?

count me in where in detroit?

More than likely the MGM Grand.

 

[warmpancakes]

Re: Bed bolts sizes?

ok let me know when