Matt's Twin Turbo Sy build

Matt

Active member
Hi guys i thought i would start a thread to keep me motivated and to fill others in on my project Sy #1207, the truck i got from a local member with a hurt engine, then picked up a fully built bowtie From LILQIK my goals are for around1200hp and 9s

The Syclone
B4DD304C-508C-4F99-86FE-7FDFDC52977C-377-000000E0BDFC8AF3.jpg

IMG_3098.jpg

IMG_3125.jpg

IMG_3127.jpg

The Engine

304 cubic inch
Bowtie Block w/ Billet Caps front to back
Even Fire Billet Sonny Bryant Crank 3.750"
Oliver Billet Rods 6.000"
Diamond Pistons (coated) 4.140"
Block fitted with piston squirters
Brodix Raised Runner Heads 310/240 cfm
Jesel Shaft Mount Rockers 1.6"/1.8"
Daytona Dash Intake (matched to Heads)
Jesel Belt Drive
Titan Billet Pro Series Oil Pump
Custom Billet Cam 258/258 @ .050 on a 115LS .675"/.750" lift (with current rocker ratio's)
Sheet Metal Valve Covers w/ Coils
Sheet Metal Oil Pan w/ Dipstick
Rpm custom twin turbo headers

A few engine pics

DSC00476.jpg

DSC00471.jpg

DSC00474.jpg

DSC00478.jpg

DSC00470.jpg
DSC06166.jpg

DSC06165.jpg

DSC06163.jpg


Headers
84F1159C-FB27-4166-8DE7-9A8D2B65E37C-377-000000DF5E94D416.jpg


Trans
4L80E
Circle D converter

Engine Management
Big Stuff 3
Tuned By Nolan

Suspension
Rpm coilovers up front
beltech drops leafs with caltracs out back

My plan is to still be able to drive it on the street on the weekend on low boost and turn it up and hit the track, not too sure how streetable it will be, the engine made 450hp N/A with a carb on a break in run, so even out of boost it will be fun.
some of the other details are still in the works as i work with Nolan at Moretto Motorsportz http://www.morettomotorsportz.com/ to make this thing a monster
 
Last edited:

nallj92

Active member
Re: Matt's Twin Turbo Sy build

awesome, Look forward to the build and more pictures!
which intake you going to run, the dash intake or the sheetmetal one?
 

Matt

Active member
Thanks, Undecided as of yet thinking the sheet metal one, might have to let the Dyno decide ; )
 

STOUT74

Member
Re: Matt's Twin Turbo Sy build

Nice lookin' build Matt. What size turbo's you thinking of running. What are you going to fuel the beast with, Petrol or Ethanol? Love the stance from the rear with the 11's. Good luck & way to represent:tup:.
 

Matt

Active member
62mm Precision billet CEA 6266, good for 750hp each, 94 octane and methanol injection on low boost, C-16 on high
 

hatrik8

Donating Member
Re: Matt's Twin Turbo Sy build

Nice steamroller wheels. :tup: Why does it look crooked from the rear? Is it the camera tilted?
 

nallj92

Active member
Re: Matt's Twin Turbo Sy build

Let me know what way you decide on intakes. I may be interested in one or the other.
 

Matt

Active member
Re: Matt's Twin Turbo Sy build

looks like i may be running the dash intake, i am going to hold on to the other one for now, i ordered my 160lb injectors today :woot:
 

90pgt

Donating Member
Re: Matt's Twin Turbo Sy build

The front off that engine looks very nice and clean, what a/c compressor is that, Is that the stock sy acc. bracket, do you happen to have a part# for that belt drive?
 

sy605

New member
Re: Matt's Twin Turbo Sy build

Love the build. No offense to Mr. Syclone but I would love to see the record for fastest V6 Sy back in the states.

Good luck!
 
Top