BMFB
Not to scale
Ok, so im running code 59. i have my waist gate set up, right now to run no more that 8 PSI, adn i have my duty cycle set at 0, and the amounts that it can correct also at 0 9 im just seeing how low it can go, for tuning purposes) any way, ill give it full throttle, and my boost will go to about 8, and then within about 3 seconds build up to about 15, and the whole time ill eb watching my knock retard and that seems fine, but its not controlling it. I do see on my waist gate duty cycle that it is staying at 0, and not moving.
I have an aftermarket boost gauge, and at idle im getting like, 20 inches of hg, so i don't think its a vacuum leak, at least its not obvious. but im wondering if the solenoid itself can be bad, or how to test to see that it is working properly, or if you guys had any other ideas
I have an aftermarket boost gauge, and at idle im getting like, 20 inches of hg, so i don't think its a vacuum leak, at least its not obvious. but im wondering if the solenoid itself can be bad, or how to test to see that it is working properly, or if you guys had any other ideas