SOLD: Aluminum Bowtie Block (76 pounds)

Vaders Sy

Donating Member
This motor was purchased with the intent of making well over 1,000 hp and torque all while keeping weight to a minimum. The block was designed to make big power. I had three Syclones and now I am down to just 1. From my other ads, I am getting out of the Syclones for now and I do not need the block anymore and could use the space! Feel free to ask questions on here or text/call. Send me a PM for my number.

Motor is wet sump, but can be switched to dry sump setup with an adapter. It has a 4" - 4.250" bore, up to a 60 mm camshaft, splayed main caps, NHRA approved, and weighs just 76 pounds. This block is the replacement block (since GM isn't building them anymore) for the GM V-6 Bowtie Block, P/N 10134388. To order and receive one, took me over a year.

Still in the original crate! $3,300.00 OBO

Vaders Sy
 

Attachments

  • IMG_5483.JPG
    IMG_5483.JPG
    2.6 MB · Views: 42
  • IMG_5486.JPG
    IMG_5486.JPG
    2.3 MB · Views: 45
  • IMG_5487.JPG
    IMG_5487.JPG
    2.7 MB · Views: 46
  • IMG_5488.JPG
    IMG_5488.JPG
    2.5 MB · Views: 54
  • IMG_5490.JPG
    IMG_5490.JPG
    2.9 MB · Views: 57
Last edited:

Vaders Sy

Donating Member
Last set of photos. I have many other photos, but the files are too large for me to attach.
 

Attachments

  • IMG_5499.JPG
    IMG_5499.JPG
    2.2 MB · Views: 33
  • IMG_5500.JPG
    IMG_5500.JPG
    3.2 MB · Views: 32
  • IMG_5503.JPG
    IMG_5503.JPG
    2.8 MB · Views: 34

proptop

Donating Member
Gents,
It appears that the block is setup for a wet sump oiling system. It would still take some work to make it usable/before building.
Thanks,
Bob
 
Top