Axle set back plates, please share experiences

asmo

Sy #2918
I want to get these when I put my lowering blocks in, mainly to fix the gap on the wheel well. with the 18's its way noticable.
?'s do these affect cause any problems with the driveline lenght or cause any other issues.
who's got'em and how long you had them, recomendations, etc..

linky
 

SikVSix

New member
Re: Axle set back plates, please share experiences

cant answer your question but I need some so thanks for the link.
 

asmo

Sy #2918
Re: Axle set back plates, please share experiences

ya no prob, anybody else got these? I wanna put them on with my 1-1/2 inch blocks that should give me almost 2" drop.
 

4C FED

Absolutum Dominium
Re: Axle set back plates, please share experiences

I have them on my Ty. If you have a rear sway bar it will change the geometry a little. I have mine installed on Ground Force mono-leafs with no pinion wedge & they work just fine.
 

Quickstop [UK]

Combating adversyty.
Re: Axle set back plates, please share experiences

take out the old wedge.

place set back plates on the springs

place the lowering block on that

place the wedge on top of the stack

you need a vicep grip to get the bolt off.

you may find your pinion angle (angle between the driveline and the rear diff) has changed slightly depending on block size. there is some argument over what is best.- search, and not just on here.

pretty easy to do.

I have 2" plus setback on my 17s.

good luck.
 

warmpancakes

New member
Re: Axle set back plates, please share experiences

I made my own , Ive seen a set of these and wasnt impressed with the quality 10 minutes with a drill press and 3/8 tap and your donw just need a 1/2 inch thick piece of bar stock and a 3/8 allen bolt
 

NecroWolf

lost marbles member
Re: Axle set back plates, please share experiences

i just flipped the wedge on to the top of my blocks and it made a good difference in centering the wheel with my 17"
 

Treymen

Donating Member
Re: Axle set back plates, please share experiences

Gonna need these also. I think my new 18's are gonna rub the cladding.
 

ZavzTy547

Senior Member
Re: Axle set back plates, please share experiences

I want to get these when I put my lowering blocks in, mainly to fix the gap on the wheel well. with the 18's its way noticable.
?'s do these affect cause any problems with the driveline lenght or cause any other issues.
who's got'em and how long you had them, recomendations, etc..

linky

Yes I bought those a few years ago, work great.
They have some good prices on radiators as well.....
 

asmo

Sy #2918
Re: Axle set back plates, please share experiences

If I cut the center bolt out and put the wedge on the top of the lowering blocks should I run new bolts though leaf pack and the blocks? The bolt cant go though the set back plates, right? I want them on the leaf pack under or over the blocks?
 

bdydrpds10

Yes I drive a Typhoon.
Re: Axle set back plates, please share experiences

If I cut the center bolt out and put the wedge on the top of the lowering blocks should I run new bolts though leaf pack and the blocks? The bolt cant go though the set back plates, right? I want them on the leaf pack under or over the blocks?

I did belltech lowered leafs then bolted stock wedge and then placed setback plate on top. Lastly, connected all together with U-Bolts.

I has worked fine for me.

I don't think you need to run the bolt through the block, just the spring pack.
 

fauXGT

Brick Pilot
Re: Axle set back plates, please share experiences

I want to get these when I put my lowering blocks in, mainly to fix the gap on the wheel well. with the 18's its way noticable.
?'s do these affect cause any problems with the driveline lenght or cause any other issues.
who's got'em and how long you had them, recomendations, etc..

linky

I just got these a couple of weeks ago. Gonna put them on this weekend. They are now aluminium blocks w/ allen bolt heads.
 
Top