RPM front coilover kit and swaybar

DavidB

New member
this may be a very dumb question but how do you mount the sway bar to the rpm tubular lower arm??????
 

Ry368

one mile = 5280 feet
Re: RPM front coilover kit and swaybar

I thought the rpm coilover kit elimanated the front sway bar or no!?
 

Turboz

NASTE
Re: RPM front coilover kit and swaybar

The factory sway bar mounts just like the factory using the factory hardware. There are plated on the arms with holes drilled and tapped. However you will have to modify or buy new bolts for it. Hope this helps.

Jay
 

Black Knight

I Glow Therefore I am
Re: RPM front coilover kit and swaybar

I used my old bolts, but had to chase the threads because of the powder coat.
 

DavidB

New member
Re: RPM front coilover kit and swaybar

so they bolt to the bottom of the control arm?

swaybar.jpg



any one have any pictures of a sway bar bolted up to them??
 

grnty3377

Member
Re: RPM front coilover kit and swaybar

I ordered the same ones from summit, belltechs? didn't get mine yet. did yours come with Ubolts and spring bushings or can you use the stock? thanks
 

DavidB

New member
Re: RPM front coilover kit and swaybar

I ordered the same ones from summit, belltechs? didn't get mine yet. did yours come with Ubolts and spring bushings or can you use the stock? thanks

you have to reuse the stock hardware. summit no longer keeps belltech leafs in stock so they order them from belltech and ship them to you. mine took like 3 weeks
 

bezerk

New member
Re: RPM front coilover kit and swaybar

are those steel leaf springs? and how much does it lower the truck?
 

Turboz

NASTE
Re: RPM front coilover kit and swaybar

Yes the sway bar bolts to the area you have marked with the arrow. Like was stated clean the threads first and reuse your stock hardware.


jay
 

Flyin Ryan

hated cuz he drives fords
Re: RPM front coilover kit and swaybar

yes and they lower the rear 3"

If there belltech springs which they look like then it won't lower your rear 3".. if it was a standard s truck it would but on syty's it lowers anywhere from an inch to two
 

Mtn Z

Donating Member
Re: RPM front coilover kit and swaybar

rearendandrobertsstuff002.jpg

rearendandrobertsstuff003.jpg

rearendandrobertsstuff006.jpg


Just did mine actually. The holes on mine weren't the same size as the stock bolts even after tapping the powdercoat so you may have to find something different. A few of the bolts have to be shortened as well because they bottom out on the tubes before they fully tighten up.
 

DavidB

New member
Re: RPM front coilover kit and swaybar

If there belltech springs which they look like then it won't lower your rear 3".. if it was a standard s truck it would but on syty's it lowers anywhere from an inch to two

yeah i just have a blazer, so 3 for me
 

DavidB

New member
Re: RPM front coilover kit and swaybar

so what sway bar are you using, my stock one comes no where close
 
Top