pass. fender question

i8av8

Donating Member
i need a passenger front fender for my typhoon, plus cladding but that's another hill to climb later. i'm holding out for a white one so i don't have to TRY to color match. my question is this, (perhaps a dumb one) can i use one from an s10 blazer or truck or does it have to gmc specific? no appointment necessary. thank you, and have a nice day!
 

NecroWolf

lost marbles member
Re: pass. fender question

there is a change at 91. i know the core support is different but i can't remember if the fenders are.
 

TYRODD

My ass. Look at it.
Re: pass. fender question

there is a change at 91. i know the core support is different but i can't remember if the fenders are.

Yep, pre-91s had the separate headlight bezels, newer trucks had a one piece grill/bezels.

You need a newer, 91-93 fender. White paint is the same for Chev/gmc.
 

s_blazin

Donating Member
Re: pass. fender question

the only difference is 82-90 had side emblems on the fender between the door and wheel arch above the body line, and 91-93 had no side emblems, however they bolt right up just the same. i have an older truck with the newer 91-93 style core support and grille.

i just may be able to find you a good passenger fender in white. i have one thats straight but i'd have to go look at the condition of the paint
 

Captain Morgan

Moderated User
Re: pass. fender question

the only difference is 82-90 had side emblems on the fender between the door and wheel arch above the body line, and 91-93 had no side emblems, however they bolt right up just the same. i have an older truck with the newer 91-93 style core support and grille.

i just may be able to find you a good passenger fender in white. i have one thats straight but i'd have to go look at the condition of the paint

correct, any 82 - 94 1st Gen Fender will work
 

i8av8

Donating Member
Re: pass. fender question

ok, so any 1st gen. WILL werk, but pre '92 will have emblems or side moldings. i need one for a '92-'93 or any white fender without moldings/emblems. got it, thanx a bunch!
 

Captain Morgan

Moderated User
Re: pass. fender question

ok, so any 1st gen. WILL werk, but pre '92 will have emblems or side moldings. i need one for a '92-'93 or any white fender without moldings/emblems. got it, thanx a bunch!

no, pre 90 or 91 will have holes. but they only take 2 seconds to fill with a mig welder. moldings dont matter, they are stick on and leave no holes.
 

i8av8

Donating Member
Re: pass. fender question

no, pre 90 or 91 will have holes. but they only take 2 seconds to fill with a mig welder. moldings dont matter, they are stick on and leave no holes.

sorry, now i got it.

i thought about filling in the holes with my mig but it just makes the holes bigger, even at the lowest setting. i have a portable snap-on. (blue point) not running gas.
 
Top