Built Motor Turbo combo feeler

sy#2921

BAMF
Looking to possible go a different direction with the truck. I have a built motor sitting here going to see if there is any interest before I decide on the new combo

Details of the motor turbo combo include

Stock block
Nitrided stock crank
4 bolt splayed main with arp hardware
eagle rods
srp pistons
fully ported vortec's 2.02 1.6 valves manley valves
cut stems & swirl polished
fully ported edelbrock 2114 portmached to heads w/injector bungs welded in
Custom cam from Cam Motion spec'd out by Waller Performance for ported vortec's
Custom RPM SS headers
Custom RPM Downpipe
Inovative 72 Dual BB Turbo

I will get pictures up next time I get out in the garage. I will stress everything is new and never run. The headers and exhaust housing are coated as well. More details will be added if needed.

Let me know what you guys think

photo7.jpg



More pictures here
 
Last edited:

bezerk

New member
Re: Built Motor Turbo combo feeler

nice combo. altough i doubt that turbo is street worthy.
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: Built Motor Turbo combo feeler

i have a GTQ74 and it is very easy to drive on the street spool is quick. i have a bbt66 on the gn and it is a faster spool then a stock turbo, it is all in the tune.
 

R&C_RallySyTy

Little Big Man
Re: Built Motor Turbo combo feeler

i have a GTQ74 and it is very easy to drive on the street spool is quick. i have a bbt66 on the gn and it is a faster spool then a stock turbo, it is all in the tune.

Not to mention the DBB makes a huge difference.
 

SEL777

One of 101
Re: Built Motor Turbo combo feeler

Man, I wish I had the cash. Wanna trade for the X-fer case?

PM me a number your looking for anyway.

Do I smell LS conversion?
 

Transdamn

Member
Re: Built Motor Turbo combo feeler

Let me know what you guys think[/QUOTE]

Pm me price. I'm interested. Also where do you live?
 

sy#2921

BAMF
Re: Built Motor Turbo combo feeler

Man, I wish I had the cash. Wanna trade for the X-fer case?

PM me a number your looking for anyway.

Do I smell LS conversion?

If this all sells that would be the plan

Sell the turbo seperate?

Could if I can get the motor and stuff sold

Right now the motor is completely assembled minus rocker studs. I recently changed rockers but didnt get the studs yet.

A complete run down:

SRP stock bore pistons
Eagle rods
Stock crank internally balanced
2114 intake that has been port matched and powdercoated
uses late model gaskets
ARP head studs
PAC 1409 beehive valve springs
Cloyes double roller timing chain non adjustable timing set
RPM sheetmetal valve covers
Rockford Racecraft modded oil pan for eagle clearance
Fluidampr balancer
TCI flexplate
Jeg elec water pump rated at 50gal/min
MSD pro distributor
Crower 1.6 enduro s/s rockers
Comp hitech cromo pushrods
New lifter spider and dogbones
Melling HP oil pump old casting before quality issues

Cam specs are 218/214 @ .050
339/332 lobe lift
114+4 LSA 110 ICL
Nearly the same as hackings 9.80 combo

Looking for $5k obo for everything listed above

Motor is located in Algonquin.

Pan will not be completely bolted on so if a local buyer comes you can verify it has what i say it has

Pics will be up by the weekend
 

SEL777

One of 101
Re: Built Motor Turbo combo feeler

B, that's a really attractive price. I just spent some cash on a pretty cheap core to rebuild as money allows (now that there's a little one on the way).
Bump for a good guy who knows his SyTy stuff. Whomever buys this set up will be getting a good deal on quality parts. I wish that guy was me.

Whats the project HP/Torque/ 1/4 times expected?
 

Syborg Twin Turbo

Syborg Twin Turbo
Re: Built Motor Turbo combo feeler

Hi Guy's If i was back in the syty game I would for sure be buying this motor as it's a great deal.

I am certain there are pics of the intake floating around on sportmachines.com somewhere. It's the edelbrock intake with the forward facing throttle body. It's an awesome looking piece.

to bad I'm not building a Ty next.

found the pics of the intake ( that was hard )

more pics are here of the intake build

http://www.sportmachines.com/gallery/edlebrock
 
Last edited:

sy#2921

BAMF
Re: Built Motor Turbo combo feeler

Yes marty that is the intake on the motor. However, that elbow was sold when the front mount intercooler was sold.
 

sy#2921

BAMF
Re: Built Motor Turbo combo feeler

Finally got some pictures last night.

I took the timing cover, water pump, balancer and pan off so all potential buyers could see the internals. I want to make sure everything is disclosed and that you know everything I say is in the motor truly is in there.

photo7.jpg



More pictures here

Also, I have finally got a price for the turbo, headers, downpipe and wastegate. I am looking for $4500 obo. I have over 6200 into it as it sits and once again these are all new unfired parts
 
Last edited:

bezerk

New member
Re: Built Motor Turbo combo feeler

i'm trying to get some qoutes for shipping. maybe you know some companies that do this? i'll sent you my addy anyway.
 
Top