F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

Injected1

Member
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

Ralph payapl address? $160 shipped.
 

ViciousV6

400HP/550FTLB
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

1BADV6 said:
Ralph,

I'll go $130 including Paypal fees for the heater hose and two clamps. Let me know.

thanks,

Make it 135 to cover fees and i will do it. Just looked up my receipts payed over 160 bucks for lines, fittings, and hose clamps.

Let me know!

If good Paypal me 135 to Boostinblazer92@aol.com

Ralph
 

1BADV6

Donating Member
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

OK, Ralph you drive a hard bargain but I'll go the $135 :) I will send Paypal payment later today.

thanks,
 

H-TOWN-TYPHOON

You're killin' me, Smalls
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

any interest in trading the 700 for a Prime Gears 4l80 kit plus tci controller?
 

ViciousV6

400HP/550FTLB
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

H-TOWN-TYPHOON said:
any interest in trading the 700 for a Prime Gears 4l80 kit plus tci controller?

pREFER THE MONEY.But give me alist of everything included in the kit and tci controller. Ever used, are they new.

I will put some thought into it once i get the info.

Thanks
Ralph
 

H-TOWN-TYPHOON

You're killin' me, Smalls
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

Prime Gears said:
$1687.35 for the complete 27 spline changeover kit.
Kits are in Kit form only!

Linkage bracket to use stock type shifter cable
Crossmember
Brace extensions
Now includes all bolts including special bolts with stainless washers for trans to engine mounting.
Syty output shaft with cryo
kit_without_shafts.sized.jpg

Short manual shift shaft
Lokar Flexible Dipstick firewall mount
Steel adaptor plate
6 bolts for adaptor plate
HD shifter cable kit and accessories that is slightly adjustable so you can line up your shift indicator better
Stainless steel shifter lever
Hardware to hook the cable to the shifter lever

100_6793.sized.jpg

This is all new in the box...never removed from the packaging.
 

ViciousV6

400HP/550FTLB
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

ViciousV6 said:
Well, Guys money is gotten really tough, and i gotta do something.

ALL PARTS ARE FOR SALE!!! MOTOR HAS BEEN SOLD!!. I will except Paypal Plus 3.25%

1. Turbo PTE-74-GTQ $ 1,000.00 Shipped plus Paypal!
2. Upper and Lower Intake Jet Hotted Sterling $$$SOLD$$$
3. Accel 1000 CFM Throttle Body W/arp bolts $475.00 $$$SOLD$$$
4. Complete Built Long Block 4.3L .030, Cyro Crank, 4bolt billet caps, Eagles, JE Sevre Duty with Hell fire rings, Vortec's ported and flow 290, manley valves, custom cam and mgnum rollers and lifters. Went 11.2 @ 120 with GT35R Pump gas @ 16-17lbs of boost.
$$$SOLD$$$
5. Billet Fuel Rails& billet press reg. $325.00 Shipped Plus Paypal
6. 84 Lb injectors $ $325.00 $$$SOLD$$$ WindedV6
7. MPE 1 5/8 Headers Stainless $ 1500.00 $$$SOLD$$$
8. Built 700R4 Trans with 9/11 2800 Stall Converter $1800.00 (pick-up only) plus Paypal
9. 3.5" Downpipe with 60mm Wastegate $1,000.00 $$$SOLD$$$
10. Custom Front Mount Intercooler All Tig Welded 3" piping with Flange to mount to Accel 1000 throttle body or can be cut off and coupler used $ 1500.00 Plus Shipping & Paypal
11. Custom MPE ALKY Kit with Aluminum Tank, controller and wiring $650.00 $$$SOLD$$$
12. An Braided Lines from Non A/C Heater core to Engine $ 100.00 Shipped plus Paypal $$$SOLD$$$ 1BADV6
13. Billet March Polished Pulleys Water pump and Crank Also Power Steering Jet Hotted to match $ 160.00 Shipped Plus Paypal
14. Remote Oil Fliter mount to enigine and Cooler all AN Lines $ 350.00 Shipped Plus Paypal
15. Oil Feed to Turbo w/ filter $ 140.00 Shipped Plus Paypal
16. Crane Hi-6 Ignition Box with Harness $ 175.00 Shipped Plus Paypal
17. Powermaster 200 amp Alternator (212 tested) $300.00 Shipped Plus Paypal
18. A/C Delete Bracket, Tensioner, Bolts & Belt (Modified to sit even closer to water pump for better clearance) $ 190.00 Shipped Plus Paypal

Motor will be removed in the next 14 days and all parts willl be shipped as they are removed from the vehicle. Thanks in Advance.

I have tons of pics and videos on the board.

Please post all interest in this thread, no need to PM me for anything. Keep it all public!

Any questions Email me @ Boostinblazer92@aol.com

Ralph
ViciousV6

Here's Update on Parts. The check is in transit for the motor. Hopefully here on Weds/Thurs and the Motor will be stripped down on Sunday and most parts should be boxed and ready to ship on Monday.

Still Some Great Deals available. All these parts are low miles, in great condition.

Thanks Again
Ralph
 

43t_ftw

Member
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

ViciousV6 said:
14. Remote Oil Fliter mount to enigine and Cooler all AN Lines $ 350.00 Shipped Plus Paypal

interested, are these the lines that run from the block to the remote filter and then too the cooler just AN lines instead?

pics? unless im blind in the pictures you still have stock lines on your truck? might just be me tho :lol:

i really need to do something about my factory leaky lines that seem to be getting worse by the day, and would rather not put another set of factory ones in :rant:
 

ViciousV6

400HP/550FTLB
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

43t_ftw said:
interested, are these the lines that run from the block to the remote filter and then too the cooler just AN lines instead?

pics? unless im blind in the pictures you still have stock lines on your truck? might just be me tho :lol:

i really need to do something about my factory leaky lines that seem to be getting worse by the day, and would rather not put another set of factory ones in :rant:

I have a set of stock ones $150.00 Shipped

021-2.jpg


I have one with -8 An from Block mount, to filter mount, and down to cooler (B&M Stack cooler) in lower front which should be able to mount in front of radiator too.

Pictures coming
016-9.jpg
 

ViciousV6

400HP/550FTLB
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

More Pictures of the parts "FOR SALE"
Oil Filter Remote Location with -AN Lines
005-12.jpg


***The hose seperators are not included-- available at add'l cost. ***
006-14.jpg



007-11.jpg



008-14.jpg



009-11.jpg



010-14.jpg



011-10.jpg



012-9.jpg



014-7.jpg



016-8.jpg



015-9.jpg



021-4.jpg
 

ViciousV6

400HP/550FTLB
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

STILL SOME GREAT GO FAST PARTS AVAILABLE!!!!!

Check out 1st post with parts and prices.

Hopefully the check will be here by Tuesday!!!!! Truck will get stripped on Weds. and hopefully parts will be boxed and shipped by the weekend.

Ralph
 

ViciousV6

400HP/550FTLB
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ Go Fast Parts.

Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ Go Fast Parts.

1BADV6 said:
Ralph,

If the AN braided heater hose comes with the billet separator clamps I'll take them for $100.

thanks,

Shipped on there way!!!

1Z62W9R70392358621 ---UPS
 

JuStBlAzIN

Active member
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

Ralph, tell me about the catch cans? Looks like one is a PCV catch can with the braided lines and the other is an coolent? selling those along withe braided break booster line?
 

ViciousV6

400HP/550FTLB
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

JuStBlAzIN said:
Ralph, tell me about the catch cans? Looks like one is a PCV catch can with the braided lines and the other is an coolent? selling those along withe braided break booster line?

THe brake booster line is $45.00 shipped with fees, the oil breather catch can was sold with the motor since the valve covers have fittings welded to them, and the over flow i will be keeping hopefully to use with the new motor once set-up to build it.

Ralph
 

boost

Member
Re: F/S Built 700R4 w/ Converter/ Billet Fuel Rails/-AN Lines/ More Parts Added!!!!!.

did your trans ever sell and if not how much. i am somewhat local and would pickup. thank you.
 
Top