Hamman offset help

syty9933

New member
i found a set of black hamanns for my black sy that look awesome. Member Nello has them on his truck in silver and a couple other members too. The ones im lookin at are 35mms all the way around. And i think that they need to be 13 in the back and 38 in the front.but i may be wrong.they are 18 by 8s. I know nothing about spacers or offsets so i need a guru to tell me what ill need to get these rims to fit correctly.

thanks



http://cgi.ebay.com/ebaymotors/18-Hamann-HM2-Style-Wheels-BMW-3-6-7-8-Series-E36-E46_W0QQitemZ350141609202QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item518610f4f2&_trksid=p4506.c0.m245&_trkparms=65%3A12%7C39%3A1%7C72%3A1205%7C240%3A1318


Btw the bmw centercap is optional so dont worry ahaha


VT5158_Black_Machined.jpg
 

Syboy

Member
Re: Hamman offset help

http://www.sytyarchives.com/howto/viewarticle.php?article_name=wheel_tech.php&dir=exterior

Stock Front 8"x16" 41mm
Stock Rear 8"x16" 13mm
ZR-1 Front 9.5"x17" 56mm
ZR-1 Rear (.5" off stock rear offset) 9.5"x17" 38mm
ZR-1 Rear 11"x17" 50mm

Closest tire size 245/40/18

If you use 275/35/18 tire ZR1 18" with 54mm offset and 1" spacer in the back then it will be correct height.

I have set of polished ZR1 18" with Dunlop Run Flat DS001 for sale $1200 plus 3% paypal fee
 

Philntex

Member
Re: Hamman offset help

If you are wanting them to fit like your stock wheels, they you need to locate a spacer that will make up the differences.

Hamman front 35mm offset
Stock front 41mm

The fronts will stick out 1/4" more than the stock wheels
You might take them to a machine shop (if this much bothers you) and have them mill 1/4" off of the inside wheel mounting surface of the wheels.


Hamman rear 35mm
Stock rear 16mm

About a 1" spacer to get them close to the same.
If you don't use the spacer, the wheels will be about 3/4" closer than the stock rear wheel.

Overall, there will be an 1" difference between the front and rear track if you don't use the rear spacer.

Some people also "bitch and moan" about the bolt pattern. The BMW pattern is 120mm. The GM pattern is 120.65mm

If you use a hub centric ring on the wheel (available for around $6-9 ea, this will center the wheel on the hub, allowing you to tighten the lugs evenly.

I ran a set of BMW fitment wheels on my 4WD Blazer for 3 years with these rings. No issues whatsoever.
 

syty9933

New member
Re: Hamman offset help

aight thanks alot, so only wheel width changes offset? Like 18 inch rims that are 8 inches wide have the exact sane offset as the stock 16s?



If you are wanting them to fit like your stock wheels, they you

need to locate a spacer that will make up the differences.

Hamman front 35mm offset
Stock front 41mm

The fronts will stick out 1/4" more than the stock wheels
You might take them to a machine shop (if this much bothers you) and have them mill 1/4" off of the inside wheel mounting surface of the wheels.


Hamman rear 35mm
Stock rear 16mm

About a 1" spacer to get them close to the same.
If you don't use the spacer, the wheels will be about 3/4" closer than the stock rear wheel.

Overall, there will be an 1" difference between the front and rear track if you don't use the rear spacer.

Some people also "bitch and moan" about the bolt pattern. The BMW pattern is 120mm. The GM pattern is 120.65mm

If you use a hub centric ring on the wheel (available for around $6-9 ea, this will center the wheel on the hub, allowing you to tighten the lugs evenly.

I ran a set of BMW fitment wheels on my 4WD Blazer for 3 years with these rings. No issues whatsoever.
 

Philntex

Member
Re: Hamman offset help

On an 8" wheel, regardless of the diameter, 0 offset is 4" backspace (width/2)
 

AutoVation

Member
Re: Hamman offset help

For original Hamann HM2's, you can basically get two offsets, the M5 offset (13mm) and the M3 offset (38mm). FYI, I kept an eye on craigslist & eBay and picked up an awesome set of originals for $500 (they were over $2k new). They show up every now and then, it took me about 3 months to find 'em.

Here's what the M5 offset (deep dish) on all 4 looks like:
IMG_2153.jpg

More pics: http://www.syty.net/forums/showpost.php?p=704995&postcount=953

Here's the M3 offset on the front and M5 offset on the rear (my preferred look and will work better with a big brake package:
Sy10.jpg


More pics: http://www.mrweelr.com/Syclone.html
 
Top