Hiss from heater controls upon acceleration only

typhoon12

Tyhoon12 #0489
I searched the forums to find out exactly where the vacuum check valves are located but could not find that specific thread. I have the vacuum diagram but for some reason I cannot physically locate the check valve behind the heater control. I hear a “hissing” noise coming out from behind the heater controls upon acceleration but not during idle. I was told to check the vacuum lines going to and from the check valve and possibly to replace the valve but I cannot fine it.

I checked most of the other vacuum lines under the hood and they seem fine.

Can someone point me in the right direction?

Also, does anyone have a part number for the check valve and are all three check valves that same part number?

Thanks,

Jason
 

Matt

Active member
Re: Hiss from heater controls upon acceleration only

I think the check valve is under the hood
 

dgoodhue

BuSTeD 4.3
Re: Hiss from heater controls upon acceleration only

The check valve is on the vacuum line that starts at the on the intake manifold and runs under the throttle body along the fuel rail and ends up around the EGR &Distributor.
 

typhoon12

Tyhoon12 #0489
Re: Hiss from heater controls upon acceleration only

Thanks! Could it be that the "hissing" noise I am getting upon acceleration is a bad value? Why only on acceleration? I checked the connections behind the heater controls and they appear to be fine. I was going to drive the car in a large parking lot with the controls out so I can determine exactly where the hissing is coming from but have not had a chance to do it. Do you think it is worth it?

Thanks!

Jason
 

SYO237

SyTy Registry
Re: Hiss from heater controls upon acceleration only

Hey Jason

How much did you pay for that truck? I remember it for sale in Sarasota going for 7k with 151k on it. Dealer owner was using it for himself to drive around in and his salesman were dumb as rocks. It started out life in NY and then came down to Naples.

Hopefully you were told it was in an accident back in 2003 on the left front fender (which is why it was missing the cladding when it was for sale in sarasota).

Carfax showed an odo rollback, but pretty sure it was clerical error as noted in Carfax as well. Still have a copy of it.



Are you in FL?
 

typhoon12

Tyhoon12 #0489
Re: Hiss from heater controls upon acceleration only

Fortunately I paid less than $7K however it has cost me in repairs!! Probably would have been easier to buy one all ready to go. One good thing is that it has been a learning process for me. My friend was actually the one who bought it and then I purchased it from him as he ran into financial troubles. Anyway, the truck needs some work which I have been doing. These forums are GREAT sources of info. and have helped me a lot.

As far as the carfax report, yes it is wrong. We contacted the previous owner who has maintenance records dating back to when the truck had 47,000 miles!! If you look at the date of Dept. of Motor Vehicle inspection by carfax and mileage and compare it to the maintenance records and inspection for that same date, you can see where it was a typo. Still dealing with carfax to fix the problem.

You are correct on the owner/dealer thing and yes, the other salesperson was not too bright. Do you have any info. on the truck? Looks like the truck was well taken care of by the previous owners but the dealer/owner beat it up a little.

I am located in Massachusetts.

Thanks for the input!

Jason
 

sy2675

He Saved the Pimp'n Game!
Re: Hiss from heater controls upon acceleration only

Thanks! Could it be that the "hissing" noise I am getting upon acceleration is a bad value? Why only on acceleration? I checked the connections behind the heater controls and they appear to be fine. I was going to drive the car in a large parking lot with the controls out so I can determine exactly where the hissing is coming from but have not had a chance to do it. Do you think it is worth it?

Thanks!

Jason

The check valve keeps positive pressure out of the HVAC controls, the valve only lets vaccum thru. If it fails or isnt there at all, when you get into the 0 psi range and above the pressure will come thru the "vaccum" line and you will hear the air blowing by the controlls.
 

typhoon12

Tyhoon12 #0489
Re: Hiss from heater controls upon acceleration only

Anyone have a part number for the check valve?

Thanks!
 
Top