Anybody ever molded the cladding to the truck

I was thinking that since the Ty i just bought has had a recent paint job(bright blue met) that didnt turn out that well and i dont like blue i have plans to return the truck back to its original white with grey cladding.

All the cladding is in decent shape, but i was thinking about getting a complete set of the puals select fiberglass cladding and actually molding the cladding to the truck, woudl be real slick once its done and would have much better fit and finsh over the stock cladding.


I know the fiberglass repro stuff isnt cheap(3400 a set) but it is much stronger than stock and ive heard that on some of the pieces it actually has better fit than the stock stuff.

Im looking for feedback on this, woudl i be considered an outcast for doing something like this??
 

MikeRenz

not stock
Re: Anybody ever molded the cladding to the truck

do what you want....it's your truck.

i bet you'll have cracking issues though if you have all of the cladding molded to the body.
 

critical

meltdown
Re: Anybody ever molded the cladding to the truck

Are ya going for the smooth look?
It may look alright if done properly. If you can prevent the adjoining pieces from cracking.
Who cares what any one else thinks. If you got the skillz , use em!
 

warmpancakes

New member
Re: Anybody ever molded the cladding to the truck

It not the adjoining pieces its the movement issue cladding flexes metal doesnt plus the materials react at differently to tempetaure variations, Take a look at some of the "imports" that are molded they all crack. I dont care what "skillz" you have you can change the laws of thermodynamics
 

critical

meltdown
Re: Anybody ever molded the cladding to the truck

Im sure theres a way around it.
Most am`s use bondo anyways.
that stuff will crack and look like shit. Someone has to pioneer these mods or well never learn anything.
 

warmpancakes

New member
Re: Anybody ever molded the cladding to the truck

Pioneer what mod? molding in a GFX package? how the heck is that new unless you change to similar materials it will crack I dont care if you use bondo, seam sealer, or panel adhesive or any one of the thousands of poly based fillers. . If it hardens it will crack and look like poop.
 
Re: Anybody ever molded the cladding to the truck

well i was really talking about molding in the fiberglass cladding with fiberglsssheets and resin. I know plenty of cars that hav body kits molded in this way and they see regular street duty that arent all cracked.

Basically take the truck down to bare metal in the areas around the cladding, and mount the cladding like you normaly would and then lay insome resin and fiberglass cloth and do several layers and sand and primer and eventually paint.

I think i may try this, once i get over the cost of the fiberglass cladding.
 

JSM

Active member
Re: Anybody ever molded the cladding to the truck

I agree it would look sweet. Only practical way I see is find a GREAT fabricator who can build some from steel and weld to body.

I took several classes from a artist (I won't call him body man). He worked in california for years, built the replicas for Miami Vice, fixed Lambo's Ferrari's, got bored with them.

He was the only TRUE artist I have met in person. Not the Boyd type shop that lays a layer of bondo on every panel they goes about smoothing.

One of the projects I brought in was building a cowl hood for my 63 Nova. At the time steel hood didn't exist so I bought a fiberglass scoop to attach to steel hood. He said the ONLY way to maybe keep from cracking was to cut the hood then form the lip so it matched the curve of the scoop so they overlapped about 2" perfectly. Even then he didn't say it wouldn't crack just the best chance.

I don't see that possible with cladding.
 
Re: Anybody ever molded the cladding to the truck

JS Manufacturing said:
I agree it would look sweet. Only practical way I see is find a GREAT fabricator who can build some from steel and weld to body.

I took several classes from a artist (I won't call him body man). He worked in california for years, built the replicas for Miami Vice, fixed Lambo's Ferrari's, got bored with them.

He was the only TRUE artist I have met in person. Not the Boyd type shop that lays a layer of bondo on every panel they goes about smoothing.

One of the projects I brought in was building a cowl hood for my 63 Nova. At the time steel hood didn't exist so I bought a fiberglass scoop to attach to steel hood. He said the ONLY way to maybe keep from cracking was to cut the hood then form the lip so it matched the curve of the scoop so they overlapped about 2" perfectly. Even then he didn't say it wouldn't crack just the best chance.

I don't see that possible with cladding.


I think steel cladding would add way to much weight to an already overweight pig of a truck. Plus welding the cladding on would casue the metal to warp and you woudl have to go back in with some kind of filler, that would eventualy crack.

I think with the right prep and enought layers of fiberglass and resin it can be done and be strong enough not the crack.

I might be the first to do this. Maybe i cna get Pauls Select to donate the cladding for the project??
 

MikeRenz

not stock
Re: Anybody ever molded the cladding to the truck

i would get myself a spare fend and piece of cladding to practice/screw around w/ first.
 
Re: Anybody ever molded the cladding to the truck

MikeRenz said:
i would get myself a spare fend and piece of cladding to practice/screw around w/ first.

Yeah see i thought about this, and getting a fender is easy, but how many people have used fiberglass cladding laying around they want to sell for cheap so i can experiment with the idea.
 

Timbo

SyTy Stalker
Re: Anybody ever molded the cladding to the truck

It wouldn't be hard to do if you had fiberglass body panels.
 
Re: Anybody ever molded the cladding to the truck

trying to mold on the stock plastic cladding would never work, it does have way to much movement. plus its going to be hard to find a resin that will stick very well to the plastic.


Also i could run fiberglass front fender that would make the job easier, but the rest of the body cant be had in glass.
 

JSM

Active member
Re: Anybody ever molded the cladding to the truck

HotRodV6 said:
I think steel cladding would add way to much weight to an already overweight pig of a truck. Plus welding the cladding on would casue the metal to warp and you woudl have to go back in with some kind of filler, that would eventualy crack.

I think with the right prep and enought layers of fiberglass and resin it can be done and be strong enough not the crack.

I might be the first to do this. Maybe i cna get Pauls Select to donate the cladding for the project??

Not like the 4 gallons of bondo it will require wont?

Warping is purely due to heat control. If you think you can grab a welder, pull trigger and go yes it will warp. If you plan carefully it won't.

I was over at the guys house who taught me what I know. He had a widebody porshe sitting there in bare metal. We were standing by it for 30 min or longer, when he informed me he just added the wide fenders to the car. Still in bare metal it looked factory. Primer would have filled any bad areas. Again all depends how you do it.

Again I don't disagree it would look cool. You found one of the areas I have strong feelings for though which is body work. I hate BONDO and bad bodywork with a passion.

The other related topic that will set me off is insurance. And for some reason the two are tied toghether close. WTF.
 

myclone

Donating Member
Re: Anybody ever molded the cladding to the truck

Re: Anybody ever molded the cladding to the truck

Its been done.... When GM removed the cargo area and renamed it the C5 ;) .
 

PPI Typhoon

DIY Madman
Re: Anybody ever molded the cladding to the truck

I've actually been looking into making a 1 piece cladding side piece, but haven't thought about molding it to the body.

Depending on your timeframe, I could possibly help you. It could very well be possible with plastic cladding. After working out the bugs in my molds, I'll be able to make cladding pieces of VERY rigid plastic which just might work for your application.
 

Joey Allen

MUNCHKIN
Re: Anybody ever molded the cladding to the truck

I have Paul's kit for my TY, and I have several years of body shop experience. And my thoughts are yes it could be done, yes it would look good, it would take a ton of hours, and yes somewhere down the line it will crack. I've done several projects on my different S-trucks, filling in the body line and grafting an actual IROC hood into my S15 hood. No matter how good you think you've got it fixed something usually happens. I think if someone would fit all the pieces together and from the rear piece to the front fender to be one piece like tahoe, suburban and blazer aftermarket kits would look good. Just my 2 cents. Good luck if you deside to tackle the project.
 
Top