Rear bumper cover plastic rivets

GarnetTy1473

Donating Member
Re: Rear bumper cover plastic rivets

kreepinty said:
Are these available? Thanks.

I'm pretty sure they are. When I bought my Ty, it was missing a couple out of the rear cover and a couple off the lower rocker. I think it was the rear bumper ones that were still available, and I had to improvise on the rocker. I had to buy them in packs of 10, so I have some leftover, however, my truck isn't anywhere close to me for me to get them out of. I should be down that way where my truck is within the next month. If I remember, I'll try to grab them.
 

nallj92

Active member
Re: Rear bumper cover plastic rivets

napa has them, just bring a plastic one in and they can match it, you gotta buy by the 5 or 10 count but spares are good anyways
 

gmcturbo

Active member
Re: Rear bumper cover plastic rivets

Thanks everyone! Jason, I have a regular rivet gun -that should work right?
 
Re: Rear bumper cover plastic rivets

Plan to do this anytime soon? I'd be in for enough to get my front bumper cladding mounted again. I got all of the other parts to finish my SY and many of them put on. Won't be long now!

Mike, let me know if you place an order, get extra and I'll share the expense with ya.
 

gmcturbo

Active member
Re: Rear bumper cover plastic rivets

SonomaGTlover said:
Plan to do this anytime soon? I'd be in for enough to get my front bumper cladding mounted again. I got all of the other parts to finish my SY and many of them put on. Won't be long now!

Mike, let me know if you place an order, get extra and I'll share the expense with ya.


John, actually I just went out to the garage and saw how easy the bumper came off so I just went ahead and took it off and drilled out the rivets. I'll probably order some rivets in the next week or two. I'll let you know when I get some..
 

Jersey 91/93

NASTE Member
Re: Rear bumper cover plastic rivets

I did mine not to long ago. I used the same information that Jason posted, and bought from the same website that Morgan posted. They shipped quickly, and corrected a shipping mistake of theirs right away when I informed them of the problem.

I don't think a regular rivet gun will work unfortunately. I borrowed a plastic rivet gun from the local body shop that did my paint (I must give them way too much business) after searching uselessly for one to buy locally. They were available on eBay last I checked, but I haven't yet felt like spending $30 on a tool that I won't need again until my next cladding project in the distant future.
 

gmcturbo

Active member
Re: Rear bumper cover plastic rivets

for anyone that uses search in the future, i found the exact ones at napa part number # 770-2871
 

SEL777

One of 101
Re: Rear bumper cover plastic rivets

kreepinty said:
for anyone that uses search in the future, i found the exact ones at napa part number # 770-2871

Which one for this Napa # for? So now I know there are two different ones used, are these for the bumper covers or the ones used for the rockers? Thanks.
 
Top