Another polished intake (Finished pictures on page 2)

Captain Morgan

Moderated User
Re: Another polished intake

Re: Another polished intake

Finally finished the intake today.... not sure how many hours I have in it, way too many considering how much I charged, but it was quite the (re)learning experience since it had been many years since I had done any heavy polishing work.

intake_28.sized.jpg

intake_29.sized.jpg

intake_30.sized.jpg

intake_31.sized.jpg

intake_32.sized.jpg

intake_33.sized.jpg

intake_34.sized.jpg

intake_35.sized.jpg
 

Black Knight

I Glow Therefore I am
Re: Another polished intake (Finished pictures on page 2)

Has anyone ever checked on a price to have any of the poshiled stuff coated so it never has to be polished again?? I cant remember what its called, its not paint clearcoat, but similar and takes more abuse, they use it on some wheels.
 

Captain Morgan

Moderated User
Re: Another polished intake (Finished pictures on page 2)

that one was actually powder coated clear earlier today, but unfortunately the casting inperfections in the intakes causes some spot to bubble when the aluminum breaths, so I just stripped it and repolished it.
 

MikeRenz

not stock
Re: Another polished intake (Finished pictures on page 2)

Black Knight said:
Has anyone ever checked on a price to have any of the poshiled stuff coated so it never has to be polished again?? I cant remember what its called, its not paint clearcoat, but similar and takes more abuse, they use it on some wheels.
its called chrome plating. Two were just done recently in TX. Search and you'll find some pics.
 

Black Knight

I Glow Therefore I am
Re: Another polished intake (Finished pictures on page 2)

MikeRenz said:
its called chrome plating. Two were just done recently in TX. Search and you'll find some pics.

You cant be serious :rotf: , do you know how much heat that chrome would hold in :tup: ?
There is a CLEAR coating that isnt clear coat paint.

:checkit:
Dura-Brite they use it an Alcoa wheels, ive heard of people using it on other stuff and you never have to polish again, Chrome--- :roll:
 
Last edited:

MikeRenz

not stock
Re: Another polished intake (Finished pictures on page 2)

Black Knight said:
You cant be serious :rotf: , do you know how much heat that chrome would hold in :tup: ?


Chrome--- :roll:

no i dont...please inform me Mr. Thermal Dynamics of Chrome Plated Metals.
 

Captain Morgan

Moderated User
Re: Another polished intake (Finished pictures on page 2)

Black Knight said:
Dura-Brite they use it an Alcoa wheels, ive heard of people using it on other stuff and you never have to polish again, Chrome--- :roll:
if its anything like that Zoop Seal shit, it probably sucks as well.
 

Black Knight

I Glow Therefore I am
Re: Another polished intake (Finished pictures on page 2)

MikeRenz said:
no i dont...please inform me Mr. Thermal Dynamics of Chrome Plated Metals.

Your Intake, TB, and Upper I/C are all made of Aluminum, correct, correct incase you wernt sure. Aluminum absorbs and holds heat at a greater rate than just about any other metal, right, again right incase you didnt know that either. That is the reason that you use it as a chill bar when you are welding other metals of thin gauge to keep them from distorting. If you go and chrome plate this already absorbant metal, then it will be even harder for it to release that heat back into the atmosphere once its warmed up.
Thermal Dynamics of Chrome Plated Metals 101

Captain Morgan said:
if its anything like that Zoop Seal shit, it probably sucks as well.

I dont have any experience with Zoop Seal, but to my knowledge Alcoa has been using Dura-Brite on their wheels for 5+ years and have had great results. Mostly on their commercial wheels, they get heavily abused and still look good years later and no re-polishing.
I had known of it for a while then met a guy at a car show with a roadster and he said he had it done to some stuff and it worked great, I dont know where or who to get a hold of though for pricing.
 

MikeRenz

not stock
Re: Another polished intake (Finished pictures on page 2)

Black Knight said:
Your Intake, TB, and Upper I/C are all made of Aluminum.
Aluminum absorbs and holds heat at a greater rate than just about any other metal.
That is the reason that you use it as a chill bar when you are welding other metals of thin gauge to keep them from distorting.
If you go and chrome plate this already absorbant metal, then it will be even harder for it to release that heat back into the atmosphere once its warmed up.
Well i guess datamaster will tell the tale once we see some post-results of the chrome plating. The lower intakes were not chrome plated, so they can still serve at the immediate 'heat sink' to the motor. The plating isn't going to completely kill all heat dissipation, just slow it. If its more than 2 degrees warmer (IAT) overall i'll be impressed.
 

turbodog

Donating Member
Re: Another polished intake (Finished pictures on page 2)

Arrrgghh....
You are referring to thermal conductivity. Aluminum is very good (205 W/M-K). The only metals better are Silver (406 W/M-K), Copper (385 W/M-K), and Gold (314 W/M-K). Chromium is not nearly as good as aluminum, at 91 W/M-K. However, compared to ANY organic (anything you can spray on), chromium is a FANTASTIC thermal conductor. For example, polyurethane (very similar chemically to any kind of spray paint) has a thermal conductivity of 0.02 W/M-K). Chrome is nearly 5000 X better than any spray paint!!!

And, thermal conductivity is only half the story. The thickness of the coating is as important. The thicker the coating, the higher the resistance to heat flow. Chrome is typically very thin , at around 50 u-inch (.00005 inch), where a sprayed-on coating is typically in the range of 1 mil (.001 inch), so the spray coating is 20 times thicker, and 5000 x higher thermal resistance, so heat flow through a sprayed on organic coating is roughly 100,000 LOWER than through chrome plating.

Someday, I will punish you all by lecturing on my thermodynamic model of the stock intercooler system and how 120 sq.in of additional radiator area improves the performance.
 

MikeRenz

not stock
Re: Another polished intake (Finished pictures on page 2)

turbodog said:
Someday, I will punish you all by lecturing on my thermodynamic model of the stock intercooler system and how 120 sq.in of additional radiator area improves the performance.
I'm up for it.


btw...you are saying that the chrome plating won't hurt the intake temps much/if at all, correct?
(triple chrome plating...the dippy kind where they put a coat of zinc on first..)
 

turbodog

Donating Member
Re: Another polished intake (Finished pictures on page 2)

All I'm saying is chrome is not nearly as bad as spraying on a clear-coat or other organic to keep the polished aluminum shiny.

Zinc wasn't listed on my original reference page
http://hyperphysics.phy-astr.gsu.edu/hbase/tables/thrcn.html
but Wikipedia (I know, but surely some geek like me would've corrected it if it was wrong) lists it at 116 W/M-K, so it shouldn't hurt heat flow much.

I 'published' my IC model about 2 years ago.... got no replies on the thread, so pulled down. May take some time to find it again, but I'll take a look.
 
Top