Can't build more than 17 psi of boost?

Sy-1177

Turbo Inside
Ok, first off, I did a search and found alot of talk around this same subject, but everyone elses experience seemed a little different somehow.

My problem is that I can't seem to build more than 17 psi of boost. I have a TIAL 38mm external gate on the x-over pipe; a boostvalve manual boost controller; welded the stock flapper dooor shut on the downpipe; all new vacume lines; (re-did last summer) no boost solenoid. When I crank down the valve, it drops the boost to 10-11 psi, so when I take the valve back out (loosen it) it builds 17 psi and thats it. No matter how much I loosen the vale, it still only builds 17psi. I double checked all my vac lines, and everything looks ok, so i'm basically lost right now. I thought maybe I had the top and bottom hose reversed on the controller, so I switched them, and was only able to build 10 psi, so I switched them back to get the 17 back again. I don't know what to do next??? Any suggestions??
 

ZavzTy547

Senior Member
Re: Can't build more than 17 psi of boost?

Sy-1177 said:
Ok, first off, I did a search and found alot of talk around this same subject, but everyone elses experience seemed a little different somehow.

My problem is that I can't seem to build more than 17 psi of boost. I have a TIAL 38mm external gate on the x-over pipe; a boostvalve manual boost controller; welded the stock flapper dooor shut on the downpipe; all new vacume lines; (re-did last summer) no boost solenoid. When I crank down the valve, it drops the boost to 10-11 psi, so when I take the valve back out (loosen it) it builds 17 psi and thats it. No matter how much I loosen the vale, it still only builds 17psi. I double checked all my vac lines, and everything looks ok, so i'm basically lost right now. I thought maybe I had the top and bottom hose reversed on the controller, so I switched them, and was only able to build 10 psi, so I switched them back to get the 17 back again. I don't know what to do next??? Any suggestions??

Either your manual boost valve is preset for 17psi max, or your tail external gate is set at 17psi and its not allowing your boost valve to adjust past 17psi

On that note, you want to test the tial gate "first" to see if your getting more than 17psi. If you are, then your manual boost valve is maxed and you need a variable boost contol Kit (0-25psi) like this: http://www.raceprovenmotors.com/cart/product_info.php?cPath=27_109&products_id=88

I went back to internal so, I have one of these boost valves laying around that goes to 25psi. Ping me if you want it...
 

syclone1100

RUNNIN AND SELLIN
Re: Can't build more than 17 psi of boost?

you also might want to check for a boost leak some along the line just to rule that out as well....
 

Sy-1177

Turbo Inside
Re: Can't build more than 17 psi of boost?

ZavzTy547 said:
Either your manual boost valve is preset for 17psi max, or your tail external gate is set at 17psi and its not allowing your boost valve to adjust past 17psi

On that note, you want to test the tial gate "first" to see if your getting more than 17psi. If you are, then your manual boost valve is maxed and you need a variable boost contol Kit (0-25psi) like this: http://www.raceprovenmotors.com/cart/product_info.php?cPath=27_109&products_id=88

I went back to internal so, I have one of these boost valves laying around that goes to 25psi. Ping me if you want it...
I may buy that boost controller off of you just to rule that out. I don't recall it ever being limited to 17 psi but what do I know? As far as I can tell, all the vacume lines are tight and intact, plus they are fairly new. Only thing I can think of is that I have a leak somewhere between the turbo and the throttle body thats bleeding off the extra boost? I did double check all those connections and didn't see anything off or out of the ordinary though.

Either way, shoot me a pm with a price on that controller and i'll see if that does the trick. :tup: Thanks for the help!
 

Sy-1177

Turbo Inside
Re: Can't build more than 17 psi of boost?

Well guys, problem solved!


Now I know you guys will say that Datamaster would have picked this up a long time ago, and I know I should have used it, but its a lesson learned

Anyways, my truck came with an aftermarket boost guage. Its an older Autometer with the fluid in it (not sure why, but it does) and for the most part, I thoughT it was reading fairly accurate. Well I was wrong!

So i've had this other Autometer boost guage sittin around for a couple years now to replace mine but never got around to it, so I finally installed it today. Took it out for a spin, and instantly built 22-23 psi!!:shocked!: So I backed off, and pulled into a parking lot to turn it down a little on the boostvalve that I once thought may have been bad. Take it out again, and its steady at 18-19 psi now. During all this testing I was running alcohol turned all the way up so I think that is what saved my motor from any detonation.... but the lesson was learned here guys... USE DATAMASTER!! :tup:
 

QUICK STORM

B.A.M.F. BMW Tech
Re: Can't build more than 17 psi of boost?

cool, glad you had the alky turned up, didn't your truck feel faster though when you had the problem?
 

Sy-1177

Turbo Inside
Re: Can't build more than 17 psi of boost?

QUICK STORM said:
cool, glad you had the alky turned up, didn't your truck feel faster though when you had the problem?
You know what, between 10-15 psi, I could tell the defference, but from 17+ I really couldn't tell. I will say this though, the sound of the turbo at 22-23 psi is music to my ears!! Deffinately sounded higher than it did at 17 psi! (now that I know the difference!)

And YES, THANK GOD FOR ALKY! It just saved me a premature rebuild! ;)
 
Top