bad valveseals/stemseals= loudrocker

bezerk

New member
yesterday i swapped my rockers, to see if i had a rocker issue or not.
i found out my lifters are good, but when i adjust the loudest rockers, i hear it puffing, and see bubbles around the valve.
than the puffing goes away, but it still keeps on leaking.
it smokes kinda bad on startup, and i have the feeling that this all is causing the loud rocker.

can i replace them with the heads still on the truck?
thanks
 

bezerk

New member
Re: bad valveseals/stemseals= loudrocker

thanks, good info, just a question, how mch pressure do i apply in the cilinder?
if you remove the seals, and the spring, wouldn't the compressed air escape, and drops the valve into the cilinder?

what kind of seals do i need for my vortec heads, with bigger valves?
 

Robert Lone

MUTANT
Re: bad valveseals/stemseals= loudrocker

The air is pushing on the bottom of the valve keeping it seated/held in place. I use the unregulated air in my shop. About 125 psi.

If you lose air pressure or unseat the valve you could drop it. Make sure the piston is at TDC on whichever cylinder you are working on. That will insure there is no way you can lose the valve even if it falls and have to take the head off.
 

bezerk

New member
Re: bad valveseals/stemseals= loudrocker

anybody has a partnumber, or knows if i can use stock GM parts on my vortec heads with big valves?
 

dgoodhue

BuSTeD 4.3
Re: bad valveseals/stemseals= loudrocker

Yeah, valve seals can be done on the truck, in the vault there is thread that I posted (read myclone response). I had all my spark plugs out but the motor turned over on me when I applied air pressure (I usued a small tank portable compressor). It isn't that big of a deal or worried about dropping a valve unless you loss power or you compressor can't keep up with a leak, which usually mean you have problems anyways.

Do you want to hear the bad news? I don't think its you valve seal, I don't see how it could be making noise becuase the seals. To me it sounds like a valve guide which means the heads have to come out...
 

bezerk

New member
Re: bad valveseals/stemseals= loudrocker

dgoodhue said:
Do you want to hear the bad news? I don't think its you valve seal, I don't see how it could be making noise becuase the seals. To me it sounds like a valve guide which means the heads have to come out...

yes, i am afraight of that also, that sux bigtime...

should i just keep on driving it, or pull the heads.....mhhh
 

Robert Lone

MUTANT
Re: bad valveseals/stemseals= loudrocker

bezerk said:
yes, i am afraight of that also, that sux bigtime...

should i just keep on driving it, or pull the heads.....mhhh
Just drive it faster. That way when it comes unmade you can coast further down the road and won't have nearly as far to walk.:tup:

Oh yeah, drive slower going away from home and faster coming back...;)

EDIT: Dave is probably on the right track...
 

sleepy

Member
Re: bad valveseals/stemseals= loudrocker

It will just leak and the guide will get looser and looser. If there's a noise, there's metal parts rubbing. That would be what I'd worry about. I think you should figure out if it needs guides. Do the air in the cylinder bit, and change the seals anyways, stock seals should work unless some weird stuff was done to the heads besides the larger valves, but when you get the spring off, (do one valve at a time) grab the valve without pressure in the cyl and try and wiggle it. (DONT DROP IT THOUGH!!!) If you feel side to side movement, there is a problem. Time to take the heads off and put even bigger valves in there...
 
Top