Megasquirt 2 project is a go

brock1949

Its alive!!!
Alright i figure i would start a new thread and keep you guys posted on what i'm doing to run megasquirt 2 version 3 board on a 2114 MPFI converted intake with 65# injectors on a 93 typhoon motor all forged internals, cyro'ed crank, custom grind cam, 2000 vortec heads worked over comp pro mags, manley polished undercut valves, beehive springs, PT60 turbo, 4 bolt billet mains on stock sy manifolds.

I just picked up a brand new assembled Megasquirt 2 version 3 ecm from ebay that was built by DIYauto. Its looking like for the time being i am going to keep my 8 wire HEI and later upgrade to a EDIS style system.

I will be keeping my old computer for IAC control and controling 4l60E/80E later. I will also be running a Innovate LM1 for wideband. The only thing up in the air is what throttle body i will be using to start with.

I should have the motor back from Hitec/Mccoy next week sometime, the ecm should be here then, the intake should be done and i will be down to the leg work of installing the wiring harness i started working on not to mention actuall intalling the new motor etc, and hopefully by then the PT60 turbo i'm getting from a member on here will be ready. Were planning on having it running in a mater of weeks here, maybe sooner maybe later depending on how soon all the parts i'm waiting on come in and how much i have to freaking work..

I will keep you guys posted on whats going on!
 

brock1949

Its alive!!!
Re: Megasquirt 2 project is a go

Megasquirt 2 pcb version 3 just showed up today crazy fast shipping from cali. So i'm one setup closer.

I didn't realize how small the freaking ecm is. I'll get some pics up in a little bit here.

I've been reading the megamanual and talking to Dieselgeek trying to get everything figure out. I've got a pretty good understanding of whats going on now hopefully it all works out.

Hey does anyone know how to wire the LM1 in so it can turn on and off with ign, and not need to be touched at all, basicaly make it more like a LC1 lol. Right now i was just turning it on and off by the switch and it was getting old in the like 40 times i drove the truck before i ripped it back apart.

Thanks !
 

brock1949

Its alive!!!
Re: Megasquirt 2 project is a go

Alright another quick question for anyone who might know, I am considering using a 2 barrel TBI V8 throttle body to start out with. It doesn't seem to far off, without the injector pod and a dry flow bench (no fuel displacing air like normal) i guess they can flow right between 600-610CFM. I'm wondering if thats going to be enough for 7-14 psi to start out with. Later on i'll goto some kinda 4 barrel or 1 giant 75,90 or something.

No real updates on the megasquirt just hoping we can use the stock TBI for a little bit and not have to mess with the IAC and TPS on the stock computer for IAC control and tranny control.
 

Robert Lone

MUTANT
Re: Megasquirt 2 project is a go

I have a Holley on mine. It's big and billet but that's about all I know other than the TPS and stuff bolt up.
 

kessler

New member
Re: Megasquirt 2 project is a go

Well i can get you a Map for a Stock truck on MegaSquirt to get you started. Also are you going to get rid of the Distributer and go Coil pack if so we also have a Set up that will work. we have part #s if you want. As far as the Throttlebodie goes. You can run anything you want as long as the TPS sensor is Calibrated to what you need. And i have a way to make a Complete plug and play harness with the Exception of the vacume tube and maybe 2-3 wires that will need to be run to the Engine bay. I dont know if this helps you in anyway but let me know and i can hook you up.
 

brock1949

Its alive!!!
Re: Megasquirt 2 project is a go

Sorry i've been working 12-14hr days for a shut down and not hitting the forums to much.

Kessler... I so need hooked up. lol :). I have no harness yet, i think i'm going with the stock TBI throttle body setup for now. I think i'm going to keep the distributor for now also, i'm going no frills for the first setup, i'm in ohio and have plenty of winter time to play with different ignitions, trannys, yada yada i just want to get this thing moving and out of the garage (at my grandpa's shop and i'm getting killed lol). So let me know what your thinking and i can take any help i can get!

Feel free to give me a call if you want. 330-904-1756
 

brock1949

Its alive!!!
Re: Megasquirt 2 project is a go

Kessler, plug and play harness... i don't think i was stressing how awesome something like that would be... I haven't cut anyhting yet, i started going through it all but didn't really start. I am keeping stock computer in place to run tranny and IAC though, but i do plan on running new wires for air intake temp (stock doesn't even have one), coolant temp, and anything else i can seperate but i'm thinking i will need to share tach, tps, and maybe some other random stuff, not sure yet.

Also after like 2 weeks of no one locally having a clue what megasquirt was, i ran into a guy working at summit racing who told me his manager has a 60's vette with a big block and a twin screw blower with megasquirt, but of coarse he wasen't working that night lol.

My intake was just dropped off to a local shop that builds tractor pulling motors along with a ton of other crap who said he would do the MPFI conversion, all the macine work, brackets/hold downs etc, etc. and i brought him the circle stock aluminum to make the bungs, the intake, the rails and he told me give him about a week tops maybe two if he gets swamped and he will do it for about 200 bucks !
 

Drac0nic

New member
Re: Megasquirt 2 project is a go

Just wanted to say good luck with your setup, I've done an MS2 on a 1227747 box before, it should be very close to yours. The 4L60E definitely complicates things, you need the tach signal and the MAP sensor signal. the stock GM TB is probably fine for what you're doing, it's marginally smaller then an LT-1 TB but with boost it probably won't matter too much. If it makes under 250 N/A I wouldn't sweat it personally, much more then that and I'd be getting excited. You should be able to use your stock CTS, and I can't remember if the CPI motors had an IAT, but I could swear that they did. Oh well, so much for senility. To turn the LM-1 off with the ignition, connect it's power either to the 3 wire O2 sensor's power or to the pink/black wire at the box. get a Chilton's/FSM and sit down with it and see what you need/don't (there's a lot you don't) If there's anything I can help with email me triodes@mchsi.com
 

brock1949

Its alive!!!
Re: Megasquirt 2 project is a go

Drac0nic, Cool man the Ms people are coming out of the woodwork finaly lol!

So i need to keep my map sensor (1 bar) hooked to the stock computer for the tranny? And its TBI not the CPI, its like like 5 connectors on 2 foot of wire lol, no IAT, i was running a 2114 which didn't even have holes for a IAT.

Thanks for the info on the LM1, and CTS is that the crank sensor ? I've got even more questions coming up, but i just got home from getting the motor and i've beat, freaking 6 hr drive home.

I got some final numbers out of him today, he was telling me with 18-20lbs of boost it shoud easily make 500-550hp that would be dailey driver safe and said with a little more boost 20-26lbs it should be in the 600-650 and he would only run that occasionaly and not from every stop light every where i go lol. I'm running his cam, the details are kinda sketchy on it but its a custom ground cam in there shop and said its what he set the world record with in the early 90's with a 9 second typhoon..and its really not that aggressive of a cam, comparable to a 270AHR comp...Freaking amazing guys down there and did AMAZING work, i'll post some pics later on when i get the camera out. They even like did a awesome paint job on it and everything looks like brand new.

So tommorow morning were going to pick up the rings and get them fitted at a freinds machine shop in the morning and start putting this thing together !!! With any luck the motor will be built this weekend and the old one will be out of the truck, i doubt we'll put the new on it yet though.
 

kessler

New member
Re: Megasquirt 2 project is a go

ill pm you the dealTails here in the next couple of days sorry its been hell here.
 
Re: Megasquirt 2 project is a go

brock1949 said:
I got some final numbers out of him today, he was telling me with 18-20lbs of boost it shoud easily make 500-550hp that would be dailey driver safe and said with a little more boost 20-26lbs it should be in the 600-650 and he would only run that occasionaly and not from every stop light every where i go lol. I'm running his cam, the details are kinda sketchy on it but its a custom ground cam in there shop and said its what he set the world record with in the early 90's with a 9 second typhoon..and its really not that aggressive of a cam, comparable to a 270AHR comp...Freaking amazing guys down there and did AMAZING work, i'll post some pics later on when i get the camera out. They even like did a awesome paint job on it and everything looks like brand new.

So tommorow morning were going to pick up the rings and get them fitted at a freinds machine shop in the morning and start putting this thing together !!! With any luck the motor will be built this weekend and the old one will be out of the truck, i doubt we'll put the new on it yet though.

Whose cam are you running? What shop?
 

brock1949

Its alive!!!
Re: Megasquirt 2 project is a go

Hitech/Mccoy race motors did all the machine work, and its one of there custom ground cams they used to make. He said he saved a couple for a rainey day and dug one out brand new and i got it for a STEAL. The specs are a custom setup they figured out but its alot like a comp 270ahr or i think 422 is the other number that cams listed under, the specs were kinda secret but he gave me enough to know what to have my heads checked out for and ideas for tunning. But he made it vary clear that the cam he gave me was the exact specs and off the same run as the one that was in the motor that set the world record in the early 90's for the fastest typhoon.. Still over all not a crazy aggressive cam.

The heads were done by a local machine shop precision machine about 6 months ago. And i just had the heads gone through again by the new machine shop that i've been using locally and he told me they were ready for cometics, and cleared them for .545 .555 area which is well over what that cam is.

The intake MPFI 2114 conversion is being done by the guys at CAMS (canton auto machine service) they build full blown race motors and tractor pull motors. Super nice guys and can do anything from balancing to 4 bolt conversions in house.. actually everything but crank grinding.

Also today i was at the junk yard today to pickup a old 4.3 that was complete just to get lifter valley hold downs and bolts and all that kinda crap and random bolts we were missing (paid him 50 bucks...)

So while i was there i noticed a 4.8/5.3/6.0 intake with they single 3" bore (looks to be roughly 76-77mm) and it still have all sensors (IAC and TPS still good) and connectors on it. So i got it and figured it could just make a plate and weld up some aluminum to bolt it down to the carb 4 bolt flange on the 2114.

Hopefully it doesn't give me to many problems while i'm trying to tune it, but i think its going to be ok. I mean its offered on a 4.8L standard and alot of guys are running 75mm single bores on the syty's..

more updates later!
 

brock1949

Its alive!!!
Re: Megasquirt 2 project is a go

That throttle body cleaned up pretty good all things considered. It is almost 4" inlet and i've not check it with calipers but with a tape it looked like 3" inlet right on the money.(76.5mm area)

I went through and cleaned it up and did a little polishing to get her smoothed out and it didn't turn out to bad. Its looking like i might be able to switch the IAC motor with the one from a TBI for the old connector on the harness. Then the TPS i might also be able to do the same, not toooo worried about it though i'm sure i can get the stock sensors on this 6.0L throttle body to work if i can't fit the old TBI stuff on.

couple pics of it with the inside cleaned up..

http://shaun.accuson.net/tb/tbtop.jpg

http://shaun.accuson.net/tb/tbbottom.jpg


The question is do i mount it sitting flat on the 2114 like the TBI was just on a adapter plate or should i make a plate the bolts to the 2114 then has the a 90* putting the TBI toward the front. .. Since we'll be just welding up the aluminum and fitting whatever together i can probably do whatever will work the best..
 

Drac0nic

New member
Re: Megasquirt 2 project is a go

it's been a while but if I remember correctly the white wire coming off of the HEI dizzy is your ignition pick up.

http://www.megasquirt.info/ms2/GM_7pinHEI.htm

This will tell you how to connect the HEI setup, use the optical input jumpers when you hard wire the ECM up. There is a black/red wire coming off the HEI unit it's self, don't forget to ground this connection as well. For the relay I used the power window circuit if I remember correctly.
In regards to the throttle body it should make plumbing easier more then anything, albeit you did pick up almost 50% more area with the 75mm TB. Hell the cost of it alone is probably worth the savings on a carb bonnet. If you cut off your old connectors and splice in the new ones with the same color code wires it should work perfectly.
 

brock1949

Its alive!!!
Re: Megasquirt 2 project is a go

Turbo is here!!!! thanks a million QWKSTORM!!!! looks great!!

I'll get some pics up of the motor and maybe the turbo later tonight .
 

brock1949

Its alive!!!
Re: Megasquirt 2 project is a go

With any luck this truck will be running this weekend, Anyone who has any input on the tunning etc i'll all ears lol. Maybe a basemap lol
 
Top