Vortec Heads & Valve covers?

James Thomas

"NO CLASS"
Hey guys, about to pick up some Vortech heads done by Jerry McCoy that used to be on Caleb Davis's truck and I am wondering if all the O.E. GM valve covers are the same? I see a lot of plastic covers floating around cheap but I was told that they won't clear the self aligning roller rockers. I was also told that there are stamped steel covers that are taller and will clear.

Now before some of you suggest the fabbed alum. goddies, let's just say this is a no bling all bussiness build and it would be a shame to cover those with a flat black rattle bomb :tdown: !

Who knows for sure?

Thanks as always!

_____________
James
 
Last edited:

#2875

built, not bought
Re: Vortec Heads & Valve covers?

i bought some stock vortec covers from ebay i think. i have the magnums and they clear. if by "the same" you are not including the syty and other pre-96 stamped covers then yes.


James Thomas said:
Hey guys, about to pick up some Vortech heads done by Jerry McCoy that used to be on Caleb Davis's truck and I am wondering if all the O.E. GM valve covers are the same? I see a lot of plastic covers floating around cheap but I was told that they won't clear the self aligning roller rockers. I was also told that there are stamped steel covers that are taller and will clear.

Now before some of you suggest the fabbed alum. goddies, let's just say this is a no bling all bussiness build and it would be a shame to cover those with a flat black rattle bomb :tdown: !

Who knows for sure?

Thanks as always!

_____________
James
 

James Thomas

"NO CLASS"
Re: Vortec Heads & Valve covers?

#2875 said:
i bought some stock vortec covers from ebay i think. i have the magnums and they clear. if by "the same" you are not including the syty and other pre-96 stamped covers then yes.


Ok so there is a "stamped" steel vortec cover? Is it taller, shorter or the same as the plastic and are they interchangable for all vortec heads (bolt pattern & shape)? No I was not including the non vortec / L-35 heads.

Thanks!

___________
James
 

jwaller

Evil Genius/SyTy Guru
Re: Vortec Heads & Valve covers?

there are only 2 covers from GM that fit. metal and plastic. any of the rockers will fit unter the metal ones(stock syty) and most all your rockers except the biggest ones will fit under the plastic ones.

either valve cover will fit any stock head
 

Loeryder

New member
Re: Vortec Heads & Valve covers?

For the record crange gold rollers with poly locks do not clear the composite valve covers.
There is a aluminum spacer available.

I am not using the Crane Golds but when we test fit them the studs were too short and the covers hit. :banghead:
 

#2875

built, not bought
Re: Vortec Heads & Valve covers?

my old metal covers did not fit my vortec heads. i had to use vortec covers.

Loeryder said:
For the record crange gold rollers with poly locks do not clear the composite valve covers.
There is a aluminum spacer available.

I am not using the Crane Golds but when we test fit them the studs were too short and the covers hit. :banghead:
 

Loeryder

New member
Re: Vortec Heads & Valve covers?

#2875 said:
my old metal covers did not fit my vortec heads. i had to use vortec covers.

Was that because of the center bolt pattern?

Wierd cuz I have used both on the L35 heads with no known issues (other than rocker clearance).
 

#2875

built, not bought
Re: Vortec Heads & Valve covers?

the corner radius is different. i may be backwards but i think the radius is tighter in the corner of the vortecs and the lip on the stamped steel covers don't allow them to seat and squeeze the gasket like they should. leaks oil.
 

James Thomas

"NO CLASS"
Re: Vortec Heads & Valve covers?

Hmmmm...... said the blind man. Ok so the plastic covers there is only one type. Can the stock SyTy PCV grommets and oil filler be transfered from our steel covers to the plastic covers?

Thanks!

James
 

#2875

built, not bought
Re: Vortec Heads & Valve covers?

NOPE. well pcv grommets are interchangeable i think.

QUOTE=James Thomas]Hmmmm...... said the blind man. Ok so the plastic covers there is only one type. Can the stock SyTy PCV grommets and oil filler be transfered from our steel covers to the plastic covers?

Thanks!

James[/QUOTE]
 

James Thomas

"NO CLASS"
Re: Vortec Heads & Valve covers?

jwaller said:
there are only 2 covers from GM that fit. metal and plastic. any of the rockers will fit unter the metal ones(stock syty) and most all your rockers except the biggest ones will fit under the plastic ones.

either valve cover will fit any stock head


Ok, let me see if I understand (again). Our stock O.E.M. stamped steel covers will fit Vortec heads (and clear rollers)? There is only one type of plastic vortec cover? And it will fit some or most roller rockers....... correct? Sorry I think I am kinda dense on this.


Thanks!!

____________
James
 

James Thomas

"NO CLASS"
Re: Vortec Heads & Valve covers?

Ok but I still don't know if I understand for SURE if the plastic's fit or what fits :dunno: ?


____________
James
 

typhoon92

Donating Member
Re: Vortec Heads & Valve covers?

James Thomas said:
Ok but I still don't know if I understand for SURE if the plastic's fit or what fits :dunno: ?


____________
James

I used the black vortec valave covers on my Comp 1.6 roller rockers with no problems.I ended taking them off becuase i purchased some of the GP valve covers. I'm also selling a set of covers with fill tube and gaskets for $75 plus shipping
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Vortec Heads & Valve covers?

Loeryder said:
Was that because of the center bolt pattern?

Wierd cuz I have used both on the L35 heads with no known issues (other than rocker clearance).


I am going to be using l-35 heads with 3/8 studs. I have a set of 1.6 crane gold roller rockers (SA) that I want to use. Will the stock valvecovers clear or do I need that spacer kit ( please link me to it or send me a pm ) ... thanks :) ---
 
Top