vortecfiero
New member
Driving around with the wastegate disconnected to get 0 boost I was surprised
at the differences.
Naturally aspirated the L35 CPI comes on hard at 3000 and pulls to 4500 rpm
(from previous experiences with the correct L35 chip etc). It does how ever have
about 85% of it's torque from 2000 up to 3500 and from 4500 up to around 5000.
After years of this setup I got to know it quite well.
Driving with the waste gate attached for boost but not driving in the boost zone
(just before 0 vacuum) the engine has a whole different personality and I was at a loss
to figure it out. Then it dawned one me... Turbos make boost and lower the vaccum
before they actually make positive boost.
This lower vaccum level really makes the engine fell more peppy...
could this be the seat of the pants feel that the scammers with the "bilge pump" blowers
talk about ?
Hmmmmm
at the differences.
Naturally aspirated the L35 CPI comes on hard at 3000 and pulls to 4500 rpm
(from previous experiences with the correct L35 chip etc). It does how ever have
about 85% of it's torque from 2000 up to 3500 and from 4500 up to around 5000.
After years of this setup I got to know it quite well.
Driving with the waste gate attached for boost but not driving in the boost zone
(just before 0 vacuum) the engine has a whole different personality and I was at a loss
to figure it out. Then it dawned one me... Turbos make boost and lower the vaccum
before they actually make positive boost.
This lower vaccum level really makes the engine fell more peppy...
could this be the seat of the pants feel that the scammers with the "bilge pump" blowers
talk about ?
Hmmmmm
Last edited: