spohn.net?

Drag SGT

All Throttle No Bottle
Has anybody ever heard of them? I didn't think anybody made a tubular/coilover kit until I saw these. Do you think they work with different brand upper control arms? I don't see that they sell any of their own. Would be nice to have Coilover's all around.

On a completely seperate note. The coilover's I got from QA-1 are powdercoated blue :squint: . I was thinking they were going to be chrome, or black, but no... they're blue. Is there any easy way to remedy this without risking a loss of structural integrity, or should if I buy these front coilovers should I just request blue coilovers? :lol:

Here's the link BTW... almost forgot. :tup:

http://www.spohn.net/category.cfm?categoryid=1197

Oh, and now that I've seen the link again, what's the difference between a bushing and rod-end kit?
 

SyTyJedi

Jedi Council
Re: spohn.net?

Those are nice looking arms. I did notice that they are for 2wd tho, not sure what the difference is going to be. I have only had 4WD S-series so I'm not very familiar with the 2wd front setup. I would double check to be sure.

Good find.
 

Drag SGT

All Throttle No Bottle
Re: spohn.net?

SyTyJedi said:
Those are nice looking arms. I did notice that they are for 2wd tho, not sure what the difference is going to be. I have only had 4WD S-series so I'm not very familiar with the 2wd front setup. I would double check to be sure.

Good find.

Hehehe, that's why I'm glad I'm a 2wd. I'm sure they would fit just fine, but I'm confused as to why there's one with bushings, and one with rod ends, and which one I would need. I wonder if you could order it with double adjustables...
 

2kwik4u

Resident slow guy
Re: spohn.net?

Can't use a 4wd arm on a 2wd frame, nor the other way around.......Just wanted to make sure that was perfectly clear.

Those are kind spendy, but work nicely......You should check some threads on S-seriesforum.com.....there is a ton of info over there.
 

Mtn Z

Donating Member
Re: spohn.net?

Spohn is awesome. I have a bunch of their parts in the rear suspension of my Camaro. On F bodies, when we go rod ends, it's for more rigidity in the rear end without the deflection of rubber or poly bushings. A lot of people say it's too rigid and the rear makes too much noise with rod ends on rough roads but it really depends on which rod ends you use and where you use them. Spohn uses QA1 rod ends I believe and they are teflon coated. Super quiet especially for a rod end.
 

epix

Typhoon
Re: spohn.net?

to remove the powdercoat that won't damage the metal use an aircraft stripper such as Tal-Strip II or VHT Fast Strip. Your local hardware store may have it or something similar. Just coat it on, let it absorb for a few minutes, rinse with water, and wipe away.
 

Drag SGT

All Throttle No Bottle
Re: spohn.net?

epix said:
to remove the powdercoat that won't damage the metal use an aircraft stripper such as Tal-Strip II or VHT Fast Strip. Your local hardware store may have it or something similar. Just coat it on, let it absorb for a few minutes, rinse with water, and wipe away.


Sweet, I knew there had to be a way to do it without damaging it. Thanks. :tup:
 

super-gt

New member
Re: spohn.net?

Whoa! Wierd, I just found that site earlier today searching around for suspension parts. I think the set-up looks pretty nice!....Now just the problem of getting the money for it...
 
Top