My vaulted thread has a bad link

MRKING

New Parts for Old Trucks
I wanted to update my vaulted hydroboost diagram pic . The pic dissappeared when smaugs server crashed . I put it on photobucket . Heres the pic .
Archive_Hydroboost.jpg


http://www.syty.net/forums/showthread.php?t=38220&highlight=hydroboost is the thread .
 

attackdog

New member
Great info. Thank you for sharing. I am looking for a used Hydro-boost setup if anyone wants to part with one? Thanks.
-Deano
 

attackdog

New member
Re: My vaulted thread has a bad link

cloneman315 said:
dude just make one i have i tink 150 in my total set up

How did you make one? I am not a "super mechanic" but I do have some skills. Could you fill me in on the parts needed and the "how to" to get it done? I would appreciate it greatly. Thanks.
-Deano
 

cloneman315

Active member
Re: My vaulted thread has a bad link

just get all the parts in the diagram above from summit jegs etc ,then go to junk yard and get the hydro set up outof a mid late 90s astro van i used my stock sy master u just have to grind the hole out a little bit works awesome also i had to cut a weld the sy rod onto the astro setup
 

Matthew Little

New member
Re: My vaulted thread has a bad link

Anyone had the 0799648050 11/16-18 at the hydroboost leak? Mine did so I got a hbs-2609 from Hydratech braking systems. they show the fitting being metric. I haven't started it to see if it still leaks with the new fitting yet, just needed th know if anyone else had this happen?
Thanks, Matthew
 

syntax

Member
Re: My vaulted thread has a bad link

Matthew Little said:
Anyone had the 0799648050 11/16-18 at the hydroboost leak? Mine did so I got a hbs-2609 from Hydratech braking systems. they show the fitting being metric. I haven't started it to see if it still leaks with the new fitting yet, just needed th know if anyone else had this happen?
Thanks, Matthew

Yes, I had mine leak, it turns out that on my hydroboost unit (astro van) the fitting was BARELY too short and it was not making great contact at the flare, i grinded just the smallest amound of material off the hydroboost unit and havnt had any trouble since.
 

Matthew Little

New member
Re: My vaulted thread has a bad link

It does not leak anymore, that fitting on the hydroboost is not an inverted flair but an o-ring like what is on the gearbox. Hydratech was the only place I found the right fitting. The brakes work great in the driveway, maybe I will drive it next year.
 
Re: My vaulted thread has a bad link

i wanted to ask this question in MRKING's vaulted thread, but since it's closed hopefully it's all right that i ask here.

MRKING,

below is a parts list i made up w/ summit racing part numbers. could you or anyone else help me out with the part numbers for the items that i don't have hyperlinks to?

RUS-648080 -6 AN to 18mm X 1.5 O-ring $11.39
RUS-620411 -6 AN 45* powerflex hose end $15.95
High pressure Input from Hydroboost Output

RUS-648060 -6 AN to 16mm x 1.5 o-ring $7.69
RUS-620421 -6 AN 90* hose end $13.95
Pump High pressure output to Hydroboost Input

25" 3/8 Low pressure return line
3/8 Brass "T" for connection

RUS-648050 -6 AN to 11/16-18 in. inverted flare fitting $10.95
RUS-620421 -6 AN 90* hose end $13.95
Hydroboost Input from pwr steering pump
36" SS Braided High pressure Teflon Line

RUS-640380 -6 AN to 5/8-18 in. flare fitting $4.95
RUS-620421 -6 AN 90* hose end $13.95
Hydroboost High pressure Output to steering box input
27" SS Russel Braided High pressure Teflon Line
 

MRKING

New Parts for Old Trucks
Re: My vaulted thread has a bad link

Look up a 6 foot section of russell ss teflon high pressure line from summit but the 25" 3/8 Low pressure power steering return line & 3/8 Brass "T" for connection I bought at autozone , any decent auto parts store should carry them .
 
Re: My vaulted thread has a bad link

MRKING said:
Look up a 6 foot section of russell ss teflon high pressure line from summit but the 25" 3/8 Low pressure power steering return line & 3/8 Brass "T" for connection I bought at autozone , any decent auto parts store should carry them .

found the 6 foot section of russell ss teflon high pressure line: http://store.summitracing.com/partd...923289+4294787983+4294906619+115&autoview=sku

from my google reading i'm pretty sure SAE J189 low pressure hose will be sufficient for the power steering return line. so i'm good there because, as you said, i can get that at any competent auto parts store.

is the tee -6, -6, 3/8? or 3/8, 3/8, 3/8? sorry if this doesn't make sense...

would this be a good tee?

http://cgi.ebay.com/Compression-bra...ZWD1VQQ_trksidZp1638.m118.l1247QQcmdZViewItem

thanks to all who have helped thus far.
 

MRKING

New Parts for Old Trucks
Re: My vaulted thread has a bad link

no for the t , it has barbed ends and uses hose clamps . 3/8 hose on all 3 sides.
 
Top