Metal Fender Liner Alternatives?

Grimgrak

New member
I'm sick of the heavy ass fender liners getting crud in the threads that like to twist the sheet metal outta shape when you try to take them off. Does anyone make a plastic fender liner that would save alot of weight and maybe some plastic clips to hold them in so you dont wind up twisting the crap outta the sheet metal? (part where the screw goes into)
 

dgoodhue

BuSTeD 4.3
Re: Metal Fender Liner Alternatives?

You may want to replace your fastners and bolts if they are getting rusting and "twisting the crap outta the sheet metal".
 

George Blake

DONATING MEMBER
Re: Metal Fender Liner Alternatives?

I've cut up some vehicles that have plastic inner fender liners. Make you some. Go to a junk yard and look for a dakota. They'll have to be trimmed down, but they'll work.
 

mattw

Active member
Re: Metal Fender Liner Alternatives?

Would fiberglass innerfenders interest you?

-Matt
 

TYTILIDIE

METH HEAD
Re: Metal Fender Liner Alternatives?

George Blake said:
That's ok if you don't drive it every day.

I daily drive mine and havent had problems with it. Hell I drive in the snow rain anything. Went on a trip like that also. Just have to clean a littel more but its worth it IMO.
 

George Blake

DONATING MEMBER
Re: Metal Fender Liner Alternatives?

They must take better care of your streets in your town than they do mine. I've painted my inner fenders 3 times over the last 4 years and every time it's because the paint has been completely beaten off of the inner fenders where the treads sling rock, slag, etc, up into them. Lines up with the treads in the tires perfectlyI couldn't imagine what that would do if that crap got up into the engine compartment. We do have bad streets here in Middletown though.
 

TYTILIDIE

METH HEAD
Re: Metal Fender Liner Alternatives?

George Blake said:
They must take better care of your streets in your town than they do mine. I've painted my inner fenders 3 times over the last 4 years and every time it's because the paint has been completely beaten off of the inner fenders where the treads sling rock, slag, etc, up into them. Lines up with the treads in the tires perfectlyI couldn't imagine what that would do if that crap got up into the engine compartment. We do have bad streets here in Middletown though.

Well, Im not sure how ours compare but this tiem of year our roads blow from all the sand they put down for ice. Its no biggiethough. Usually after 3-4 days its all gone anyway and it doesnt usually snow a whole lot. This year we are getting it pretty good though. I guess ditching the wheel wells isnt for some. I love it though cause you get amazing instant access to a lot things that you normally wouldnt. I can change my plugs all from the top, dont have to go in the side at all. :lol:
 

MikeRenz

not stock
Re: Metal Fender Liner Alternatives?

i took my ty to get inspected w/o fenderwells in it...and they laughed at me. Apparently you need them in PA.
 

SyTyJedi

Jedi Council
Re: Metal Fender Liner Alternatives?

I'd love to get my hands on some good condition stock inner fenderwells.
 

MikeRenz

not stock
Re: Metal Fender Liner Alternatives?

SyTyJedi said:
I'd love to get my hands on some good condition stock inner fenderwells.
you mean something like these?

Fender%20Wells%20Flat%20Black.JPG
 

mattw

Active member
Re: Metal Fender Liner Alternatives?

This one looks pretty damn sexy to me:

Painted%20fenderwell%20and%20other%20parts.JPG


Also the two that Renz posted seem strangely familiar.

I'm currently making a fiberglass mold of the one in this pic. Once the mold is complete I will be able to make duplicates out of fiberglass in basically any color.. The surface facing the inside of the engine bay will be a smooth chemical resistant gel coat finish. I'll probably die the resin black that I use so that the other side will be black...

If all goes well I'll be making a mold of the other fenderwell as also..


-Matt
 

MikeRenz

not stock
Re: Metal Fender Liner Alternatives?

yup...just let me know when you want my other fender well to make pretty. :lol: I couldn't find the pic you posted since your dir structure is a horrid mess. :rotf:
 

92boostedty

Senior Member
Re: Metal Fender Liner Alternatives?

when and how much?
mattw said:
This one looks pretty damn sexy to me:

Painted%20fenderwell%20and%20other%20parts.JPG


Also the two that Renz posted seem strangely familiar.

I'm currently making a fiberglass mold of the one in this pic. Once the mold is complete I will be able to make duplicates out of fiberglass in basically any color.. The surface facing the inside of the engine bay will be a smooth chemical resistant gel coat finish. I'll probably die the resin black that I use so that the other side will be black...

If all goes well I'll be making a mold of the other fenderwell as also..


-Matt
 

mattw

Active member
Re: Metal Fender Liner Alternatives?

92boostedty said:
when and how much?

I'm actually flanging that fenderwell as I type this.. I plan to spray the tooling gelcoat and lay the first few layers of glass on the mold this weekend.. The mold will probably be complete in a few weeks..

In order to determine how much I need to make a part in the mold and see how much material(gelcoat, resin, cloth, mat) I use.. I'll let you know ASAP but it will prolly be at least a month before I get that far...


-Matt
 
Top