WS6 Wheels

Aeroking

e.i.
Does anyone have any pics of WS6 wheels on their SyTy??

I like the wheels i had on my T/A, and i can get a set fairly cheap. but i'm not sure how they would look.

314915336.jpg
 

Aeroking

e.i.
Re: WS6 Wheels

they look gold becuase the pic was rotated so the wheels line up. I kinda dont care for it. I'm refinishing my stockers, but they're not looking too good, GM must have used a gallon of clear on those things. I'll probably go with charcoal ZR1 knockoffs, but still havent decided.
 

'JustDreamin'

Dream: 6LV8 Turbo Bravada
Re: WS6 Wheels

91blazins10 said:
Just be warned that those are heavy....

The aftermarket Z06 castings are 7 to 8 lbs heavier than the factory Z06 wheels (which are pretty light for factory wheels at about 20 to 21lbs a piece). What's the big deal about 7 or 8 lbs? Well, its that aftermarket knockoffs are roughly 35% heavier, and I'd bet most of that weight is out at the perimeter where it hurts the most.

Also, they're not as strong as the factory Z06's. The factory rims were either forged or spuncast, depending upon year of production / manufacturer.

But they do have the advantage of being cheap!.

'JustDreamin'
 

viperman5

Member
Re: WS6 Wheels

If you are having difficulty removing the clearcoat from the wheels, I have used graffiti remover to get most if not all of the clear cost off wheels before polishing them. You can get graffati remover from Lowes, Home Depot, ... in the paint department.
 

Aeroking

e.i.
Re: WS6 Wheels

viperman5 said:
If you are having difficulty removing the clearcoat from the wheels, I have used graffiti remover to get most if not all of the clear cost off wheels before polishing them. You can get graffati remover from Lowes, Home Depot, ... in the paint department.


had no trouble taking the clear off, i was justin saying that to get the same smooth finish on the wheels that the factory had, i probably gotta dump a gallon of clearcoat on.

my refinished pic.
http://www.syty.net/forums/showthread.php?t=44991
 
Top