Dammit , Screw those high powered car washes!!! ---

alwayscode390

pppssssshhhhhtttttttttttt
Well when I bought my truck I noticed the drivers side emblem was cracked , so I put clear nail polish the cracks to seal them together. Its been almost a year now....and I have managed to stay OUT of those drive thru car washes....until TODAY!!! I have driven it in the snow 2 times now without a wash and it was almost white, so I decided since it was warmer today (30 degrees) I would clean her up.

I asked My dad, and my friends if my emblems would be safe in there, and they all said HELL YEAH, DONT WORRY. Well I just got back and my PASSENGER side ( the good emblem ) was totally stripped off :( . The funny part is I like the way it looks , and I think I am going to strip off the drivers side one ( cracked already ). The only one I REALLY need is the rear one ... thats all most people will see when we race ;) ---

ps. Has this happened to anyone else before?! What should I use to get the emblem off without hurting the cladding, just get my fingernail under it or will it just keep ripping??
 

442typhoondude

Ty'less Bum
Re: Dammit , Screw those high powered car washes!!! ---

My dad put his 1984 Hurst Olds through a "touch free" car wash about ten years ago. If I remember right the place had a guarantee even. After a little waiting, one of the car wash employees came rolling out of the building dragging one of the stripes on the ground. :tdown:

If you know anything about the 1983/1984 Hurst Olds, you know how it's almost impossible to find the original correct stripe kits, and nearly as hard to apply them.

I think the place ended up paying for it, but I'd keep anything with a high powered water jet away from any kind of stickers.
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Dammit , Screw those high powered car washes!!! ---

Yeah I knew better, thats what pisses me off....I was just listening to everyone else and ALL the car washes here are "touch free" nowaday. I bet its just sitting there on the ground in the wash...but the line was 5 cars deep and the doors close when one car leaves and the other goes in , or I would go back for it ... just to keep it, hehe (dammit now I want to go back, hahah!!!) I am pretty sure its been ran over a few times by now ---
 

Ozrein

BC Syclone
Re: Dammit , Screw those high powered car washes!!! ---

I've never had any issues with the local one here. It's one of the touch-less carwashes.
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Dammit , Screw those high powered car washes!!! ---

Well thats good....I was just bummin' AND confused that I lost my GOOD one, but my cracked up one stayed on, lmfao. Now if I decide to put another one back on, I wont be able to go back into that carwash again, hehe ---
 

FxsX24

94 S10 to be lowered/v8
Re: Dammit , Screw those high powered car washes!!! ---

they have sticker packs on ebay for like 30 bucks

new ones will stay applied, remember 15+ year old stickers will "wear out"

AND WTH would you even start a sy/ty with snow in a five mile radius
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Dammit , Screw those high powered car washes!!! ---

Yeah I was thinking that the stickers were just old, and new ones should be fine. Well if I dont get to work, I cant afford my Syclone....so it HAS to go in the snow, either that or I TRY to get to work in my Camaros...and end up in a DITCH within a mile ;) ---
 

keith455

Average Joe
Staff member
Re: Dammit , Screw those high powered car washes!!! ---

442typhoondude said:
My dad put his 1984 Hurst Olds through a "touch free" car wash about ten years ago. If I remember right the place had a guarantee even. After a little waiting, one of the car wash employees came rolling out of the building dragging one of the stripes on the ground. :tdown:

If you know anything about the 1983/1984 Hurst Olds, you know how it's almost impossible to find the original correct stripe kits, and nearly as hard to apply them.

I think the place ended up paying for it, but I'd keep anything with a high powered water jet away from any kind of stickers.
These
http://www.phoenixgraphix.com/gm/1984ho.htm
And for your olds
http://www.phoenixgraphix.com/gm/8587olds.htm
 

AUSyTyIN

Unbusted $#it box
Re: Dammit , Screw those high powered car washes!!! ---

None of my vehicles have ever seen any such car wash. Touch free or otherwise.
 

ABLITZ

Damn Yankee
Re: Dammit , Screw those high powered car washes!!! ---

MHST Guy said:
None of my vehicles have ever seen any such car wash. Touch free or otherwise.

:tup: them weed whackers will scratch the hell outa your car
 

mandingo

She's an Alcoholic
Re: Dammit , Screw those high powered car washes!!! ---

I can even get my ty through a drive through car wash, it sits too low, so i have to hand wash her, i put her up on a ramp to clean the complete under side, If we had one of those topless carwash places here, i might give that a try :lol:
 

442typhoondude

Ty'less Bum
Re: Dammit , Screw those high powered car washes!!! ---

keith455 said:
Never heard of those guys, thanks for the link. At the time I think Lauren Engineering was the only option, and their kits aren't correct. Now that I think about, I think he may have even had a stripe kit custom cut for that car after buying a crapped out NOS kit.

My 85' probably won't be getting stripes if things go as planned, but I'll be keeping that site handy should I change my mind. Thanks.
 

blk00z28

Forced to by choice
Re: Dammit , Screw those high powered car washes!!! ---

You guys are crazy for even thinking about going thru these automated car washes.

Just the thought of reclaimed water being reused to wash my truck makes me twitch.
 

spooldup

Super Member
Re: Dammit , Screw those high powered car washes!!! ---

I could not imagine the day i would ever pull my ty into a car wash. I don't even like to dry or wash my ty with microfiber let alone some stranger washing it or even worse a machine! When i dry the ty i use my compressor to blow the water off and lightly buff the rest out. Swirl marks are the enemy!
 
Top