how to take off power steering pump

MikeRenz

not stock
Re: how to take off power steering pump

you need to pull the pulley off of the pump...which requires a special pulley puller
 

JSM

Active member
Re: how to take off power steering pump

and rub your tummy while patting your head.
 

UR50SLO

V6+2=LSXCamaro
Re: how to take off power steering pump

I tend to bend that rule..... I take a die grinder and skim the outer edge of the allum. bracket enough to slip a wrench on that bolt head and back the braket off the motor while un-screwing it. (the outer bolt you can see but not get a wrench/socket on by the resivoir.)

I've also made one single hole in the pully before.. that works but it's not as prity. Why didn't GM put holes in the pulley?

I also cut the steel bracket that go's to the exhaust manifold. Once the pump is off I take the rest of that braket off.
~Scott
 

phoonTy

Truckless. For now.
Re: how to take off power steering pump

UR50SLO said:
I tend to bend that rule..... I take a die grinder and skim the outer edge of the allum. bracket enough to slip a wrench on that bolt head and back the braket off the motor while un-screwing it. (the outer bolt you can see but not get a wrench/socket on by the resivoir.)

I've also made one single hole in the pully before.. that works but it's not as prity. Why didn't GM put holes in the pulley?

I also cut the steel bracket that go's to the exhaust manifold. Once the pump is off I take the rest of that braket off.
~Scott

I was close to that. I just cut a notch in the bracket to get a wrench on it. When I reinstalled the pump, I chose to forget that bolt. :tup:
 

blk00z28

Forced to by choice
Re: how to take off power steering pump

MikeRenz said:
you need to pull the pulley off of the pump...which requires a special pulley puller

Which any auto parts store should have for anywhere between $25-60 dollars.
 

'JustDreamin'

Dream: 6LV8 Turbo Bravada
Re: how to take off power steering pump

Just be warned that sometimes those pulleys get stuck on there pretty good.

I tried to pull the one on my C5 power steering pump (different application, same issue, same design stupidity) before installing it on my LSx motor and couldn't get it to come off. Had the puller "pop" off which was quite startling. Decided to look for other means of removing it from the bracket, instead.

Good luck. Might not be a bad idea to spray some penetrating lube on the pump shaft / pulley interface.

'JustDreamin'
 

denny

Active member
Re: how to take off power steering pump

UR50SLO said:
I tend to bend that rule..... I take a die grinder and skim the outer edge of the allum. bracket enough to slip a wrench on that bolt head and back the braket off the motor while un-screwing it. (the outer bolt you can see but not get a wrench/socket on by the resivoir.)

I've also made one single hole in the pully before.. that works but it's not as prity. Why didn't GM put holes in the pulley?

I also cut the steel bracket that go's to the exhaust manifold. Once the pump is off I take the rest of that braket off.
~Scott


Exactly what I did, except didn't put a hole in the pulley, just leave that bolt out.
 

blk00z28

Forced to by choice
Re: how to take off power steering pump

CKEITH said:
or can be borrowed from autozone with a small refundable deposit.... deposit,use part,return part,recieve deposit back = free. :tup:

I was going to put it like that, but usually I have noticed that the deposit I lay down for the tool I've borrowed. Is the exact sale price of the tool. And at that point, I think to myself.. why not just buy the damn thing so I have it. Course, your store might be different. But thats how mine does it. :roll:
 

jjorgensen52

NHSTE - I'm the only one!
Re: how to take off power steering pump

yes, try the pulley puller. Do not try to remove the pulley without one, you will end up with a gutless pump. Do not ask me how I know that :lol:
 
Top