track results

[MikeSyclone]

went to the track tonight, only got 2 runs off......

60 ft...........1.84
1/4 mile.....13.44
mph..........97.6


60 ft...........1.89
1/4 mile.....13.30
mph..........100.7

mods include: johnson ic pump hotwired w/heater hose lines, 160 tstat, afpr set to 45, rpm no muffler cat back, k&n intake, no spare/jack, belltech rear swaybar, bilstein front shocks, rancho shocks in the rear, solid motor mounts.

im a little upset, my best before the rear shocks and swaybar was a 13.0 at 100 mph with a 1.75 60ft.......i dunno

 

[wantingasy]

Re: track results

went to the track tonight, only got 2 runs off......

60 ft...........1.84
1/4 mile.....13.44
mph..........97.6


60 ft...........1.89
1/4 mile.....13.30
mph..........100.7

mods include: johnson ic pump hotwired w/heater hose lines, 160 tstat, afpr set to 45, rpm no muffler cat back, k&n intake, no spare/jack, belltech rear swaybar, bilstein front shocks, rancho shocks in the rear, solid motor mounts.

im a little upset, my best before the rear shocks and swaybar was a 13.0 at 100 mph with a 1.75 60ft.......i dunno

How'd you manage only a 13.30 when the 60' is the same as your first time and you're at 100.7 mph instead of 97.6? Hmm... Good times though :tup:

 

[MikeSyclone]

Re: track results

converter was locked on the second run....i think the times suck, i lost .3-.4 tenths

 

[JSM]

Re: track results

.1 seconds of 60ft = .2 seconds of ET

So there is .2 seconds right there. Need more work getting out of the hole. After that I would have to see a run to know what fuel, etc was doing.

 

[dgoodhue]

Re: track results

The rear shocks and sway bar shouldn't affect your ET's that much. If anything the extra weigh of the rear sway bar could slow it down a couple hundredth (0.02) It may have disrupted the balance of your launch. What were you 60's before? Maybe the track prep wasn't that great this time? What was the weather like and the different days you ran?

 

[MikeSyclone]

Re: track results

it was a little warmer out the 1st time i went out (did a 1.75)......i thought the stiffer the rear on these trucks the better? what setting should i put the ranchos on?