Truck with parts value?

jjorgensen52

NHSTE - I'm the only one!
Just wondering to myself as I try to clean out the garage. I am planning on holding onto my GT until I go back to school and selling it as winter sets in. I currently have all the parts (except a shifter cable) which would be required to convert the truck back to stock automatic CMPI, and I am wondering if I would be better off selling all those parts and then selling the truck by itself, or hanging on to them and selling it as a package. Either way I'm looking to break even on the truck.
 

ty166

Donating Member
Re: Truck with parts value?

i havent done any major mod to my ty, c-5 and ls-1 brakes , switched to a2a and deleted abs. however i have saved everything that i took off so if i ever sell the truck and the new owner wants a stock truck they have everything. personally i would hold on to them and use it as a selling tool ,if the new owner isnt interested in it then sell them. my 59 is backed half with a ford nine inch , but i have a complete roller frame just in case one day i sell it and the buyer wants stock frame and rear end.
 

poorboy93

Veteran S10 Owner
Re: Truck with parts value?

Save the parts as a package. Those trucks are already rare enough as it is, why kill another one. good luck!
 

SY2455

70's Veteran
Re: Truck with parts value?

As been said already keep all the parts with the truck and give them to the person that end up buying the truck. So they have the option of going back to stock.
 

dgoodhue

BuSTeD 4.3
Re: Truck with parts value?

I would keep the parts around until your ready to sell it. The next owner may or may not want them. What do you have? a shfter assembly, a few misc brackets, & 700r4?
 

jjorgensen52

NHSTE - I'm the only one!
Re: Truck with parts value?

dgoodhue said:
I would keep the parts around until your ready to sell it. The next owner may or may not want them. What do you have? a shfter assembly, a few misc brackets, & 700r4?

Shifter assembly, console support bracket, 700r4, I have the original wheels (why you would want those is beyond me) with brand new tires, all the gear indicator / shift knob and boot parts, also have an original upper intake and throttle body for it. Only piece I don't have is the shifter cable. Have the flexplate too, but that isn't anything special, and the entirity of the motor that came out of it (which was not the original as far as I have been able to tell)
 

ty166

Donating Member
Re: Truck with parts value?

i still have the original 6cyl-three speed trans that came in my 59 , you never know what the next guy might want. i know its a extreme example but look at some of the older muscle cars that are numbers matching and correct versus modified with all the original parts missing. those rims might be ugly but with such low production numbers of the sogt you never know what could happen.
 

SY2455

70's Veteran
Re: Truck with parts value?

If the guy want to go all stock. He will want those parts. That the way I was on our 442 W-30 when I got it and I ended up with 3 of this, 2 of that. The 3 of this was the 8 track tape players they had in 1970. That was a good thing.:tup: The 2 of that was the 442 exhaust manifolds. Another good thing.:tup: All for $1000.00. The guy may want all the stock parts if he is that type of person.:rotf: :rotf:
 

supersports10

New member
Re: Truck with parts value?

jjorgensen52 said:
Just wondering to myself as I try to clean out the garage. I am planning on holding onto my GT until I go back to school and selling it as winter sets in. I currently have all the parts (except a shifter cable) which would be required to convert the truck back to stock automatic CMPI, and I am wondering if I would be better off selling all those parts and then selling the truck by itself, or hanging on to them and selling it as a package. Either way I'm looking to break even on the truck.

what are you liiking to get out of it.... just curious.

also i would keep all the original parts. just in case
 
Top