HighPerformanceTrucks
Lift & Shift Specialist
George Blake told me the ecm changes idle based on D vs Neutral/Park positions with the stock shifter. I am no longer using the stock shifter and I am using the Art Carr Gate shifter where there is no provision for the GM switch.
I've been thinking of devising some method of integrating the stock switch, but I thing the throw distance between gear selection on the Art Carr shifter is longer than the stock gear throw distance making the stock slider switch useless.
I'm also not sure if jumping the terminals on the switch to disable it or disabling the feature in the stock ecm is good idea because of the necessary ecm idle changes for gear selection.
Found this thread, but not a bunch of helpful info:
http://www.syty.net/forums/showthread.php?t=43167&highlight=shifter+switch
Any ideas appreciated.
Btw, I'm installing a 4l80E transmission with the TCI transmission controller and Twist Machine Paddle Shrifter kit.
I've been thinking of devising some method of integrating the stock switch, but I thing the throw distance between gear selection on the Art Carr shifter is longer than the stock gear throw distance making the stock slider switch useless.
I'm also not sure if jumping the terminals on the switch to disable it or disabling the feature in the stock ecm is good idea because of the necessary ecm idle changes for gear selection.
Found this thread, but not a bunch of helpful info:
http://www.syty.net/forums/showthread.php?t=43167&highlight=shifter+switch
Any ideas appreciated.
Btw, I'm installing a 4l80E transmission with the TCI transmission controller and Twist Machine Paddle Shrifter kit.