SyTy GM Crate Motor

Aeroking

e.i.
At any point between 1991 and today, has GM made a crate SyTy engine, or long block, or short block.

Point being was any engine package offered with the 8.35 to 1 pistons from GM, as a direct replacement?
 

nallj92

Active member
Re: SyTy GM Crate Motor

i know what your wondering, get a boroscope and look in there and see if there dished pistons, i thought the same thing when ryan told me it was a crate gm syty motor from Factory Motorparts.
 

Aeroking

e.i.
Re: SyTy GM Crate Motor

ok, i have a friend with a borescope, i'm gonna use it this weekend.

what am i looking for on the pistons, to distinguish a 8.35:1 SyTy piston from a 9:1 S-10 4.3L piston. Will the SyTy be dished, or flat-top of what?
 
Re: SyTy GM Crate Motor

Here is a pic of my GT pistons. They look the same to me. :dunno:

Tsgt77.jpg


OK... upon further inspection they do look a little different. How can the untrained eye tell?
 

Aeroking

e.i.
Re: SyTy GM Crate Motor

i saw valve reliefs, but no dished pistons.

so for now low boost, and gonna start putting a short block together.

BTW, stock Sy motors are roller cam correct.. cause when i had my intake off, i had no lifter girdle.

So all signs say that its a 9:1 S-10 4.3L

Cylinder walls still had distinct cross-hatching, afterall it only has 2800 miles on it.

my friend with the borescope has 3 Sy motors, all blown one way or another. I'll start building a solid bottom end.
 
Re: SyTy GM Crate Motor

The stock SyTy cam is the LB4 TBI cam. Found in all N/A 4.3L TBI engines.

The pistons looked like what SonomaGtlover posted?
 
Top