New Best ET @ Atco Raceway 5-03-07

ViciousV6

400HP/550FTLB
Here is the time slips and some video of the runs. I gotta install line lock on the truck to stop it from rolling out of the lights. These passes better no tuning done since last time @ track only some suspension work done and if i could get that 1.80 or 1.70 60' i would of been 11.2 or 11.3 for sure. on 17lbs of boost.

012-1.jpg


011-1.jpg


1st pass video

http://www.youtube.com/watch?v=s2IO8Bv6gi8

Here is video link to 2nd pass.

http://www.youtube.com/watch?v=7BnstmL-Ckc

Ralph
ViciousV6
 
Last edited:

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: New Best ET @ Atco Raceway 5-03-07

get a real 60 and you may start moving. what psi?
 

ViciousV6

400HP/550FTLB
Re: New Best ET @ Atco Raceway 5-03-07

I really need to install some line lock on the truck so i can build boost and launch the truck. I would say with the last pass it was not even on 1 lb of boost with the launch. So next maybe some tuning and then some line lock and then hopefully by the MPH it should be going like 11.2 or 11.0 but that is on perfect 60 foot times.

Ralph
ViciousV6
 

ed hess

race or get outta the way
Re: New Best ET @ Atco Raceway 5-03-07

Raist103 said:
get a real 60 and you may start moving. what psi?

I kinda think ralph knows if he tries to 60 ft it with the existing trans it would break. not that it matters since its probly gonna break soon anyway. :)

btw if you do what don says its into the 10's.
 

Syclone#1992

SyTy.net Moderator
Re: New Best ET @ Atco Raceway 5-03-07

ed hess said:
I kinda think ralph knows if he tries to 60 ft it with the existing trans it would break. not that it matters since its probly gonna break soon anyway. :)

btw if you do what don says its into the 10's.

Saw you post here in and Atco thread Ed, and I thought you were posting a new time for us :lol: Come on Ed, we are waiting for ya to run again and post some times!
 

MikeRenz

not stock
Re: New Best ET @ Atco Raceway 5-03-07

in the 2nd run did you pop the rear glass to use it as a huge spoiler?
 

Mad Mike

SYCOSIS
Re: New Best ET @ Atco Raceway 5-03-07

Syclone#1992 said:
Saw you post here in and Atco thread Ed, and I thought you were posting a new time for us :lol: Come on Ed, we are waiting for ya to run again and post some times!

Why? He gets chastised when he does. :roll:
 

420

Broke Ass Racing
Re: New Best ET @ Atco Raceway 5-03-07

Congrats Ralph. It's always a good feeling to get a long term project on the road and start making some passes. Keep us posted! :)

- Matt
 

ViciousV6

400HP/550FTLB
Re: New Best ET @ Atco Raceway 5-03-07

Syclone#1992 said:
Saw you post here in and Atco thread Ed, and I thought you were posting a new time for us :lol: Come on Ed, we are waiting for ya to run again and post some times!

Hey Tim,

Ed will be out and running soon enough. This post is about my Truck and if it wasn't for Ed hooking me up with Harry Anderson i would still be out there like many people trying to figure out my truck. This motor has been together for almost 3 years and has gone from running 14's to 11.5 and now shortly in the 10's for sure getting 18-22 mpg. The best switch i made was going to DFI since the tune in the truck hasn't changed in like 1 1/2 years but had tons of little issue with boost control, and intercoolers, and one turbo but this turbo is small and making lots of power.

I will be hitting the track next week @ E-town for the cruise nite. They let you make a free pass down track and i will try my best to pull a 1.7 or 1.8 60 foot and it should be in low 11's.

Ralph
ViciousV6
 

ViciousV6

400HP/550FTLB
Re: New Best ET @ Atco Raceway 5-03-07

MikeRenz said:
in the 2nd run did you pop the rear glass to use it as a huge spoiler?

I was trying for more down force since i saw similar wing on the 7 sec mustang that ran before me. The guy said " you can't do that only 7 sec cars can have wings" Damn.

Guess i will just have to hold the brake harder.

Ralph
 

Vaders Sy

Donating Member
Re: New Best ET @ Atco Raceway 5-03-07

Great times! I am sure it is on here somewhere, but what is your build? Do you have any other vids?
 

ViciousV6

400HP/550FTLB
Re: New Best ET @ Atco Raceway 5-03-07

Vaders Sy said:
Great times! I am sure it is on here somewhere, but what is your build? Do you have any other vids?

Well we started with my stock block, (rpm) 4 bolt splayed caps billet, (rpm) stock nitrided crank, Eagle H-Beam rods, JE Severe Duty Pistons, JE Hell Fire Rings, Vortec Heads (my friend) ported polished and flow matched 290 cfm @ .500 lift, (simonek is in now with M2 Cylinder Head company so they did one of the guys heads awesome place) Cam was custom grind by Simonek, LS1 Valve springs, Gold Crane 1.6 rockers, Stock lower and upper intake just ported to match, stock throttle body, (MPE Fab) custom front mount intercooler A2A, (MPE Fab) custom headers, (limit engineering) GT35R Turbo Ball Bearing, ATR 3" downpipe w/ 38mm tial wastegate.

If you link onto the video, most of the typhoon runs are mine that say "Boostinblazer"

These are video from last spring up to last nights runs. The dates are on them so you know when they took place.

025.jpg


027.jpg


Ralph
ViciousV6
 

Vaders Sy

Donating Member
Re: New Best ET @ Atco Raceway 5-03-07

Nice build, I do like the nitto's you have on your Ty. I wish my engine looked like yours!
 

ViciousV6

400HP/550FTLB
Re: New Best ET @ Atco Raceway 5-03-07

Vaders Sy said:
Nice build, I do like the nitto's you have on your Ty. I wish my engine looked like yours!

Alot of time, Yea i think i am changing to ET Street Drag Radial 255/50/16 a bit taller but i like that they are softer compound. The Nitto's arwe great for driving cause they will last longer a bit harder compound. Although with the new RPM Coilover set-up it seems to be on the ground better.

Ralph
ViciousV6
 

typhoon92

Donating Member
Re: New Best ET @ Atco Raceway 5-03-07

ViciousV6 said:
Alot of time, Yea i think i am changing to ET Street Drag Radial 255/50/16 a bit taller but i like that they are softer compound.

Ralph
ViciousV6

I have some MT ET Street Drag i'll sell you!
 

Syclone#1992

SyTy.net Moderator
Re: New Best ET @ Atco Raceway 5-03-07

ViciousV6 said:
Hey Tim,

Ed will be out and running soon enough. This post is about my Truck and if it wasn't for Ed hooking me up with Harry Anderson i would still be out there like many people trying to figure out my truck. This motor has been together for almost 3 years and has gone from running 14's to 11.5 and now shortly in the 10's for sure getting 18-22 mpg. The best switch i made was going to DFI since the tune in the truck hasn't changed in like 1 1/2 years but had tons of little issue with boost control, and intercoolers, and one turbo but this turbo is small and making lots of power.

I will be hitting the track next week @ E-town for the cruise nite. They let you make a free pass down track and i will try my best to pull a 1.7 or 1.8 60 foot and it should be in low 11's.

Ralph
ViciousV6

Congrats Ralph, forgot to mention that in the first post! I hope you are planning on making it to the Homecoming event! I would love to see it run in person! Good luck on the next run you will be in the 10's before you know it!
 

ViciousV6

400HP/550FTLB
Re: New Best ET @ Atco Raceway 5-03-07

Syclone#1992 said:
Congrats Ralph, forgot to mention that in the first post! I hope you are planning on making it to the Homecoming event! I would love to see it run in person! Good luck on the next run you will be in the 10's before you know it!

Thanks Tim,

Yea i won't be @ Homecoming but i am thinking of coming to the Nats. I have already planned some vacation time and it renews itself in August so the perfect time to take a week for the Nats and make it a vacation trip. I will trailer it there just in case i push it too far but i gotta make it through the summer safely.

Thanks
Ralph
ViciousV6
 
Top