NEVER ENDING VISIT TO THE BODY SHOP help!

92boostedty

Senior Member
so the guy is saying that i will be getting my truck back for the past month and i still havent got it i called him on friday and ofcourse there is nothing but bad news the front fender claddings are hitting on the front rims...and they keep breaking or something one was brand new and the other was a garbage piece i got from tom that i over paid for...i used after market fenders is that the reason that the cladding is hitting on the rims? i have 18" c5 rims are the after market fenders shorter then the original ones? any thoughts?
thanks
 

mattw

Active member
Re: NEVER ENDING VISIT TO THE BODY SHOP help!

My guess would be that the body shop doesn't know what they are doing.. If the fenders were CAPA certified then they should be the exact same shape as the originals.. Were you in a wreck? If so are you sure that the suspension didn't get tweaked and maybe the wheel is no longer where it should be in the wheel well..


-Matt
 

Xtrempickup

All turbo All the time
Re: NEVER ENDING VISIT TO THE BODY SHOP help!

i just did new capa fenders on my syclone and they matched up right and im no body man, body on mine isnt perfect, but i was in a hurry, im happy with it the way i did it, claddings fine etc
 

George Blake

DONATING MEMBER
Re: NEVER ENDING VISIT TO THE BODY SHOP help!

They need to get the fenders lined up correctly. Some finders will require the bolt holes to be opened up to get them to match the mounting points. The cladding should be lined up so it looks right and the they should drill through the hole in the tabs and put the screws in that way. If the fender isn't in correctly AND they are trying to "force" the cladding tabs to line up with the holes already in the fender, they WILL continue breaking them. If they've broken them once, then they've already repaired them and broken them again. They push your truck off to the side to do some other jobs to make some money back before they tackle yours again. Be nice and let them know you've GOT to have the truck back. Offer the advice above and remember to be nice. The body shop I worked for years ago did this and I know exactly what they are doing.
 

92boostedty

Senior Member
Re: NEVER ENDING VISIT TO THE BODY SHOP help!

thanks for the advice guys im goin to get the truck back and let someone else try to put them on right
 

UR50SLO

V6+2=LSXCamaro
Re: NEVER ENDING VISIT TO THE BODY SHOP help!

92boostedty said:
thanks for the advice guys im goin to get the truck back and let someone else try to put them on right

The reason I'm late on stuff some times is I'm so darn buizy. I've got a family and all this work and I'm only one guy. I've had employees before and it's nothing but a headache.

If it's a problem of them not knowing Typhoons or the scope of the job that's one thing.

But I understand being buisy and late on time estimates. As a body guy it's always the stuff you can't see that bites ya in the butt every time. Cost more time/money.

Figure out the real root of the problem.. time or just not able to handle the job.

Good luck,
Scott~
 

92boostedty

Senior Member
Re: NEVER ENDING VISIT TO THE BODY SHOP help!

i saw the truck i think he just has the fender claddings on too far towards the door so its rubbing on the front i switched rims with turbojunk and now hes rocking the wagon wheels untill i get it figured out
 
Top