no brake lights or turn signals/problem solved, thanks

ppress79

Member
I checked fuses and bulbs but nothing. the turn signals in the instrument panel don't even come on. any ideas where to start would be appreciated.

Phil
 
Last edited:

Don W.

Stab it and steer it
Re: no brake lights or turn signals

Re: no brake lights or turn signals

Well the brake circuit goes through the turn sig sw because one bulb does both at the rear. Knowing that I'd start at the sw. Not a fun job. Maybe you can start by disconnecting the wires to the sw under the column and doing some testing.:2cents: Since you have NO turn sigs on either end of the truck I suspect the sw based on previous threads. Seems to me people have commented the sw is problematic.
 

ppress79

Member
Re: no brake lights or turn signals

Re: no brake lights or turn signals

thanks, I'll check it out tonight.

Phil
 

kentuc

Member
Re: no brake lights or turn signals

Re: no brake lights or turn signals

Check the multi-pin connector on the steering column. It`s about 4 inches long and black..
 

protosy

New member
Re: no brake lights or turn signals

Re: no brake lights or turn signals

tail lights all light up? if not, check your grounds.
 

Don W.

Stab it and steer it
Re: no brake lights or turn signals

Re: no brake lights or turn signals

I curious if he has brake lights.
 

ppress79

Member
Re: no brake lights or turn signals

Re: no brake lights or turn signals

tail lights are fine, no brake lights or turn signals. I'm working on changing the turn signal switch right now
 

ppress79

Member
Re: no brake lights or turn signals

Re: no brake lights or turn signals

well I changed the switch and still nothing. I have marker lights front and rear and headlights. no power to fuses. Where do these circuits draw their power from and I'll start there. Wipers work, horn works, hi beam switch works. don't know about cruise. The bulbs in the dash don't come on either. Its like absolutely no power to the system.
 
Last edited:

Don W.

Stab it and steer it
Re: no brake lights or turn signals

Re: no brake lights or turn signals

If someone doesn't beat me to it, I'll go look at some wiring diagrams right now. See what I can figure out.

OK, from the manual;

1) Connect a test light from the orange wire at stop light sw connector to ground.
Lamp lights? Go to step 2
Lamp doesn't light? Check Stop/haz fuse, if fuse OK then you have an open in the orange wire from fuse block.

2) Connect test light from white wire at stop light sw to ground and press brake pedal.
Lamp lights? Go to 3
Lamp doesn't light? Replace stop light sw.

3) Connect test light from white wire at directional sig sw connector to ground.
Lamp lights? Go to step 4
Lamp doesn't light? You have an open in white wire between stoplight sw and directional sig switch.

4) Connect test light from Yellow or Dark Green wire at directional sig sw to ground and press brake pedal.
Lamp lights? You have an open in that wire between dir sig sw and read (I think they mean rear) directional lights.
Lamp doesn't light? Replace directional sig sw.


HTH
 
Last edited:

cloneman315

Active member
Re: no brake lights or turn signals

Re: no brake lights or turn signals

if u want to call me at the shop i can try to walk u through the schematic
 

ppress79

Member
Re: no brake lights or turn signals/problem solved, thanks

A bad pin in the plug (corroded). Once cleaned they started working

Phil
 

kentuc

Member
Re: no brake lights or turn signals/problem solved, thanks

Check the multi-pin connector on the steering column. It`s about 4 inches long and black..
__________________
Was it this connector?
 

ppress79

Member
Re: no brake lights or turn signals/problem solved, thanks

yes, it had some green corosion on it. A pipe cleaner and some contact cleaner was all it needed. I also tweaked the female part so it gripped the pins tighter.
 
Top