my actual a/c weight savings

MikeSyclone

New member
ok so i just finished removing the ac from my truck. i took out everything, lines/bracket/condensor/heaterbox/etc.......this truck is my little project, i dont need it to get anywhere, its not my daily, so i decided to scrap the heater box completly, the heater core blew 2 years ago and never fixed it and i have managed. so anyway: threw it in a box and it all came out to 46.5 lbs...i didnt weigh the rpm piece but it did not weigh much at all.

i thought that was a pretty decent loss. i cant wait to get my abs delete kit and aluminum drums.
 

QWERTYphoon

Motley Driver Award 2009
Re: my actual a/c weight savings

Great information, Do you know how much the heater core and heater box weighed?
 

MikeSyclone

New member
Re: my actual a/c weight savings

the heater core is actually still in there....the box and blower motor weighed more than i thought....you wouldnt believe the room you have to move around in there now
 

SY2932

Administrator
Re: my actual a/c weight savings

QWERTYphoon said:
Great information, Do you know how much the heater core and heater box weighed?

I ripped my AC out of my truck two weekends ago. Not that much, only 12.6 pounds. After the paint dries and I get my non AC box together, I will weight it too...
IMG_1614.sized.jpg


The compressor was heavier than I thought, 15.3 pounds.
IMG_1613.sized.jpg


Which is quite a bit when the roll pan on our trucks is 15.5 pounds :eek::
uvs030126_004.jpg


I must have gotten the "light weight AC system" in my truck since the entire set up only tipped the scales at 38.4 pounds. Guess that's why I have had such good luck at the track
icon_lol.gif
.
IMG_1616.sized.jpg
 

Flyin Ryan

hated cuz he drives fords
Re: my actual a/c weight savings

Mike thanks allot for weighing everything like that I was curious to how much I saved except I removed the ac bracket and tensioner setup as well which weights a good amount also.. if you go that route please weight that slug and post it up
 

dgoodhue

BuSTeD 4.3
Re: my actual a/c weight savings

SY2932 said:
I must have gotten the "light weight AC system" in my truck since the entire set up only tipped the scales at 38.4 pounds

Mike, what about the condensor and air lines?
 

CLONE

New member
Re: my actual a/c weight savings

dgoodhue said:
Mike, what about the condensor and air lines?

The condenser is the 1st item on the scale in his last picture. The refridgerant lines don't weigh much, but it looks like he is missing some.
 

SY2932

Administrator
Re: my actual a/c weight savings

CLONE said:
The condenser is the 1st item on the scale in his last picture. The refridgerant lines don't weigh much, but it looks like he is missing some.

Naw, they're all there. I put eveything back together the way that it came off the truck so that I could remember how it all went...You can't see the other line because they are just beyond the top of the frame in the picture. If you look closely, you can see the big yellowish nut that holds the lines to the canister that ran to the compressor. I was getting so far away from everything, that is was getting difficult to see what was on the scale readout.

This is what all the aluminum sans the condenser weights:
IMG_1615.sized.jpg
 
Last edited:

SY2932

Administrator
Re: my actual a/c weight savings

Just got done completely disassembling one of my non AC blower boxes and cleaning/bead blasting/painting it before going in the truck:

IMG_1651.sized.jpg


IMG_1652.sized.jpg

As you can see, this box tips the scales at 5.8 pounds making it considerably lighter than the AC one. My new theme is "less is more". If something isn't used, I'm taking it out
icon_lol.gif
. Mechanical fan is the cross hairs next. Hope to be able to drop stuff in the engine bay and have it hit the ground more often than not...
 
Top