Campbell.. GMC Center cap purchase?

UR50SLO

V6+2=LSXCamaro
Was told that Cambell was making some GMC center caps for the 1993 Corvette Saw Blades.

I would like to purchase a set from him or someone who is making them if possible. I just

got my wheels back from being totaly re-done from Transwheel. They are perfect.

My e-mail is UR50SLO@aol.com have him contact me or anyone who is making them.

Thanks alot!
Scott~

I've still got a few of the Typhoon engine plates if they'd like to trade a few ;)
 

SY2932

Administrator
Re: Campbell.. GMC Center cap purchase?

I can address your questions here if you like
icon_razz.gif
. Yes you heard correct that I am in the process of making a set of custom center caps for my ZR1 saw blades:
IMG_1608.sized.jpg

"ZR1 saw blades 17 X 9.5 front & 17 X 11 rear. Soon to be polished..."

Two other folks with these rims contacted me shortly afterwards and I will be cutting them a set as well. I am doing the design myself and will be the one who cuts them when the time comes. Both designs are unique to the individuals and no one else will have a set like theirs, they will truly be "one offs".

I have also been contacted by folks with the grand sport rims as well. I always thought that the folks who were running vette rims like to advertise that they were running vette rims. Seems there are quite a few folks other there that want "GMC", "syclone" or "typhoon" instead of the vette flags...

Something that I was going to do for myself and a few OG's is QUICKLY turning into a project
icon_lol.gif
. I will be ordering a tapered end mill to cut the draft in the bottoms of the caps. Due to the time and expense of making these, they will be "pinched" in place with three stainless steel fasteners 120 degrees apart.

If there is a genuine interest, I MAY have to offer these to the masses... Obviously what engraving the individual desires will have a BIG influence on price. Therefore, the $64,000 question is what would everyone consider a fair price? I work in a machine shop, I don't own it so I would have to float the idea by my boss to see if he would even go along with it.
 

UR50SLO

V6+2=LSXCamaro
Re: Campbell.. GMC Center cap purchase?

I'd just like GMC personaly. That covers both Sy/Tys. If somone wants Typhoon or Syclone then the price go's up. When I had the Typhoon engine plates made I had a price quoted and had a very small mark up mainly to cover my time polishing or sanding the top of the plates and putting together the Epoxy,package and taking to the post office.
I don't care for the corvette flags at all. I'll put them on till you get these done but That's the limit.
I realy liked the way Wade S's truck looked with the rims on it.
I got these rims from a guy in Chicago and sent them in to Transwheel for a re-newed finish. They are perfect. Just put a set of tires on them and put them on the Typhoon. Heather ended up liking the way they looked and I think they will look awsome with a Orange truck. I can picture it.
Let us know how much and how soon!
~Scott~
 

skipztt

boost
Re: Campbell.. GMC Center cap purchase?

yo hook me up. i would like to get "typhoon" to fit on the grand sports. i would be willin to pay extra for the "typhoon" logo. let us know what ur planning to do.
 

alwayswantedone

Donating Member
Re: Campbell.. GMC Center cap purchase?

Hey Mike if its not too much trouble I may be interested in a gmc set for my grand sport style zr1's. So whens the polishing gonna start?
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: Campbell.. GMC Center cap purchase?

hey mike any chance of doing them on zo6s?
 

attackdog

New member
Re: Campbell.. GMC Center cap purchase?

Are there any pics of this project? I can't wait to see the finished product.
-Dean
 

Sy-1177

Turbo Inside
Re: Campbell.. GMC Center cap purchase?

lol, your commited now Mike!! Why don't you make me a set while your at it! :lol:

I finally got myself another set of '90 ZR1's too! I just stripped down one of the rears last week and I plan to spiff them up too! I doubt they'll look as good as yours, (when their done) but with this being my first time polishing wheels, i'm not expecting much. ;)
 

SY2932

Administrator
Re: Campbell.. GMC Center cap purchase?

Lately we have been so busy at work, I haven't had too much time to mess with my personal endeavors :(. I'm still modifying the logos in CAD so that it will be able to machine them on the mill. We are in the process of switching over to a newer CAD software and it is completely different from the older version so there is a bit of a learning curve there.

I hope to do some test cuts this weekend. That is if there is even a machine open to cut them on... I like pics since they are worth a thousand words. I will put up some pics of my progress in this thread. You guys who have never made chips before might even learn something new
icon_wink.gif
.

As far as cutting other center caps goes, that may be a challenge since I can't check the dimensions against my rims. If you guys have a pair of dial calipers, you can get some of the dimensions to confirm fit.

There will be a draft cut into the bottoms of the caps so that they "nest" into the rims. This will also aid in locating them when I cut the logos in a spoil plate. More than likely, I will make a spoil plate big enough so that I can cut four center caps at a time. They will also be bored out in the back for (front) axle clearance since I don't know how much everyone is lopping off. I thought about just doing this to two of them but that would made them front and rear specific. Better to just do all four since it won't add that much more machine time.

Jeff, I'm prolly not going to really tear into these until fall. After I stripped the paint off, it looks like someone started to sand a small spot on two of them. Looks like they gave up pretty quick though.

Brian, get together with RJ and he will show you how to be a "bling king". I told him everything that I know and he has pretty much everything that I use
icon_lol.gif
.
 

Sy-1177

Turbo Inside
Re: Campbell.. GMC Center cap purchase?

SY2932 said:
Brian, get together with RJ and he will show you how to be a "bling king". I told him everything that I know and he has pretty much everything that I use
icon_lol.gif
.
Yeah, I thought about asking him, but then I remembered that he only finished like 2 or 3 of his rims before he gave up! :lol: Maybe i'll invite him over for a couple beers and spring it on him...put him to work! :tup:
 

alwayswantedone

Donating Member
Re: Campbell.. GMC Center cap purchase?

SY2932 said:
Jeff, I'm prolly not going to really tear into these until fall. After I stripped the paint off, it looks like someone started to sand a small spot on two of them. Looks like they gave up pretty quick though.


Yeah you said you were not going to get to them for a while. As far as the sanding goes NOT me. All I did was start trying to get some of the paint off them.
 
Top