What would all this be worth?

[TYTILIDIE]

NONE OF THIS IS FOR SALE YET, JUST NEED TO KNOW WHAT I COULD GET OUT OF ALL THIS. IT MAY VERY WELL GO UP FOR SALE.
All from a 93 TY.
Front bumper(small crack top dead center about 2")
Front bumper support
Core support
upper and lower control arms
OEM Zr1's with 335 Michellen Pilots on the back. 275's up front about 40% tread left
one rear end 149K on odo
stock DP?
All glass, doors, sides, tail gate and windshield
mirrors
overhead console
dash board
gauge cluster
floor shifter w/cable
center console(decent shape)
front 93 seats
back 93 seat
carpet
ECM
Wiring harness?
door panels
doors
interior trim pieces
truck body
right and left door cladding
passenger side rear corner
wheel well cladding(rear, both sides)
Cladding in front of rear wheel (both sides)
Torsion bars
Torsion bar cross member
trans cross member
rear leafs
gas tank

 

[Norm]

Re: What would all this be worth?

you looking for individual prices or as a total price. Pics would help abit more. It's one of those things if a person needs what you have then it's worth lots. If there's a few items for sale then you have to drop your price to try sell it.I wouldn't mind seeing pics of the tires/rims.

 

[TYTILIDIE]

Re: What would all this be worth?

I was looking for individual prices. I wouldnt waste time taking numerous pics and posting til I was sure I was going to do this. Just looking to see if I could make off all this. So for now I guess assume everything is fair to good shape.

 

[2fast4u]

Re: What would all this be worth?

you looking for individual prices or as a total price. Pics would help abit more. It's one of those things if a person needs what you have then it's worth lots. If there's a few items for sale then you have to drop your price to try sell it.I wouldn't mind seeing pics of the tires/rims.

Love to see them rims/tires too....

 

[Tytime4226]

Re: What would all this be worth?

id be intrested in the tailgate mines shot lol possiblt driver side and passenger side fenders also and i would liek to see the rims to if you could

 

[toolmann]

Re: What would all this be worth?

intrested in pass side rear corner cladding pending pictures/description/condition

 

[TYTILIDIE]

Re: What would all this be worth?

Nothing is for sale yet. Im not even considering sales until I figure out what all this crap is worth and if it will even be worth it to me to sell anything. Thats my reason for not posting this in the for sale section.

 

[phoonTy]

Re: What would all this be worth?

Nothing is for sale yet. Im not even considering sales until I figure out what all this crap is worth and if it will even be worth it to me to sell anything. Thats my reason for not posting this in the for sale section.

Not that I'm an expert by any means, but it seems people make more parting stuff out then they do selling complete trucks. Just look at Mike from Fort Collins. His truck is basically complete minus motor, and can't give it away at $4,000.

You've got a pretty good list of items, considering it's all in at least "good" shape, I'd say you're in the same ball park as what Mike is asking for his truck.

Cladding is hard to come by, you've got Fatman seats, gauge cluster is getting harder to come by, door panels are Ty specific, Syclone owners want Ty mirrors, front bumper support is hard to come by.... yeah, I'd say in parts at close to if not more than $4,000 :dunno:

 

[Norm]

Re: What would all this be worth?

You have to look at what he is selling. Not everything is sy/ty only. The a-arms are sonoma stuff,same with the glass,door,crossmembers. Stuff like that is always at the recyclers. The cladding is where the money is. A complete set of cladding is $1500-2000. There has been a set of seats on e-bay for $100 with no bids.Shipping was $100 or so, that might have something to do with sales also.Lots of small items always help. But as for Mike's green/gray ,I would really like to buy that one for a -8 project. But the transport a non running truck is $1300.00. Other wise I would buy it .

 

[TYTILIDIE]

Re: What would all this be worth?

I came up with $4800 all together. I guess htere is the fact that Ild sit on most of it for who knows how long, maybe its not owrth it to get rid of it all. My plan was to restore the truck, it has no motor no trans no tcase. I can easily do all the work and piecve everything together. FOr the way I want this truck to turn out it will cost me a total of 14K paint and all. I paid $1000 for the whole thing. A friend of mine here in town told me he was contemplating selling his truck and it is a NICE truck. So I thought maybe Ild skip the rebuild crap, part it out and sell another one of my vehicles and take it off his hands. The TY I have to part out needs everythign and I wnated to build it ground up but when I sit and figure it all out money and time wise IM not so sure its hte best option.

 

[toolmann]

Re: What would all this be worth?

i would think parts are worth what people are willing to pay,or where you set the bar.. one guy will pay 400 for a piece of cladding,another will pay 200 for the same piece...too many variables to pin a price to each piece without a break down...condition being the major contributor..
if you research it alittle in the 'for sale' section,you'll see what they are selling for & go from there...

EDIT: i see you did that. looks pretty reasonable...