Engine torque twisting the cab A-pillars?

Tooky

Serious about performance
Has anyone ever heard of this? I was waxing my truck the other day and I noticed both "A-pillars" (I hope that's the right term, the pillars that surround the windshield) have slight "crumples" at the very top where it meets the roof. I know I have seen some Mustangs and Turbo Buicks with these types of crumples when they have been heavily drag raced. I guess you could say my truck has been heavily drag raced.

Is it even possible for engine torque to twist the cab on these trucks? I just don't remember those bumps in the paint last time I waxed it...
 

Silly

Banned
Re: Engine torque twisting the cab A-pillars?

Odds are it is exactly what you think it is. And like you said, you have raced it hard.... a cage will sturdy that up.... but then your stuck with a truck with a cage.
 
Re: Engine torque twisting the cab A-pillars?

most vehicles that have this issue are unibody cars...not full framed vehicles like ours...however if there is enough power then anything is possible.it just seems hard to believe...b/c the frame would have to twist/flex,then somehow twistflex the rubber body mounts to an extreme point to actually distort the cab.....
 

Silly

Banned
Re: Engine torque twisting the cab A-pillars?

CKEITH said:
most vehicles that have this issue are unibody cars...not full framed vehicles like ours...however if there is enough power then anything is possible.it just seems hard to believe...b/c the frame would have to twist/flex,then somehow twistflex the rubber body mounts to an extreme point to actually distort the cab.....

But you also seem to be assuming this truck leaves perfectly straight with no body lean.... which I am I not sure i have ever seen a syty do.

His truck has power and he knows how to put it to the ground.... its pretty violent on the launch... I am not too surprised actually.... I expect to encounter this myself, and that is only when the cage becomes a possibility.
 

sytyguy

Moderated User
Re: Engine torque twisting the cab A-pillars?

CKEITH said:
most vehicles that have this issue are unibody cars...not full framed vehicles like ours...however if there is enough power then anything is possible.it just seems hard to believe...b/c the frame would have to twist/flex,then somehow twistflex the rubber body mounts to an extreme point to actually distort the cab.....

Yeah, I agree. Doubtful that torque flex has caused it. I could see more stress from cornering or from slamming the door hard. I would expect Hoover or Robert or Phil Long or Les or etc....to have a similar issue. Plus there are lot's of fast trucks without cages or crazy suspension that have yet to experience this.

But, yeah, I'd think if there was enough twist to affect the A-Pillar, you'd have some alignment issues in the frame/suspension.

Strange....

Hood
 

Tooky

Serious about performance
Re: Engine torque twisting the cab A-pillars?

Yeah I don't know much about body/suspension (which is why I asked) but I agree it seems hard to believe that the twist could transmit all the way to the roof.

Anyhow, I tried to take a picture but it's almost impossible to get it to show up. Here's all I could get:

door_pillar.jpg



I think you can see a little shadow underneath the reflection of the lightbulb.
 

91blazins10

Active member
Re: Engine torque twisting the cab A-pillars?

my typhoon has that, my thinking behind why it was like that though was because of bad body mounts.
 

95xtreme

New member
Re: Engine torque twisting the cab A-pillars?

if it is near the top at the corner of the windshield it could be the leaded joint starting to come apart with age. I have seen s10's do it before and since same body most likely the same culprit.
Just my 2 cents.

Edit yes same thing the joint can start to come apart slightly with age, temperature fluctuation, and hard driving.
 

THEMADTYPH00N

Active member
Re: Engine torque twisting the cab A-pillars?

I don't know if any of you have seen a bare frame from one of these trucks, but they will flop around very easy just picking it up. When GM designed it I doubt they had drag racing in mind and probably created it to have more strength when towing or hauling thing in the bed.
 

Tooky

Serious about performance
Re: Engine torque twisting the cab A-pillars?

I'd be interested in hearing what the higher-mileage heavily raced low 10 second trucks have to say (after giving theirs a close inspection).
 
Re: Engine torque twisting the cab A-pillars?

95xtreme said:
if it is near the top at the corner of the windshield it could be the leaded joint starting to come apart with age. I have seen s10's do it before and since same body most likely the same culprit.
Just my 2 cents.

Edit yes same thing the joint can start to come apart slightly with age, temperature fluctuation, and hard driving.

:stupid: I've been stripping my Ty down to bare metal to get ready for paint and the factory brazed right where you're talking. Sorry for the crappy cell phone pic.

Ty001.jpg
 

Windedv6

Ty n 10s
Re: Engine torque twisting the cab A-pillars?

Tooky said:
I'd be interested in hearing what the higher-mileage heavily raced low 10 second trucks have to say (after giving theirs a close inspection).
Although my milage is low, my power range is is higher. Years ago when I did my bigger build and suspension setup I boxed my frame and welded the cross members that were originally rivited. Like was mentioned before, the stock frames flex a lot and force the strain into the the cabs of these trucks.

John
 

bezerk

New member
Re: Engine torque twisting the cab A-pillars?

all of my truck have that. thought it was a normal thing...
 

jjorgensen52

NHSTE - I'm the only one!
Re: Engine torque twisting the cab A-pillars?

My brother's truck flexes so much that he actually cracked a frame rail... I'd hardly be surprised if this was a result of flex also
 

Silly

Banned
Re: Engine torque twisting the cab A-pillars?

It is from the torque and all the hard racing. Not only have you drag raced the heck out of this truck but you have also taken it road racing.

I don't believe it gets anymore open and shut that this case.

Get a cage if you want it to stop. Simple as that.
 

dgoodhue

BuSTeD 4.3
Re: Engine torque twisting the cab A-pillars?

Silly said:
It is from the torque and all the hard racing. Not only have you drag raced the heck out of this truck but you have also taken it road racing.

I don't believe it gets anymore open and shut that this case.

Get a cage if you want it to stop. Simple as that.

I bet if the frame was reinforced that would help as well, it should help with the handling as well.
 

jslezak83

Soon-to-be BoostedBlazer
Re: Engine torque twisting the cab A-pillars?

i was kinda suprised that these truck flex so much but heres the proof look at the door seams:
s102.jpg

s101.jpg
 

critical

meltdown
Re: Engine torque twisting the cab A-pillars?

You might also check the inside of the pillars for evidence of re-straightening.
When cabs become distorted,(diamond shape) the windshield will not seat right in the pinchweld.
This will cause the glass to crack. Porta-powers are placed diagonally across the opening and push the pillars "square" again. Auto factories quit using lead long ago, so seams are brazed instead to kill the squeeks. I doubt this helps, but still food for thought.
 

Daron

Active member
Re: Engine torque twisting the cab A-pillars?

jslezak83 said:
i was kinda suprised that these truck flex so much but heres the proof look at the door seams:
s102.jpg

s101.jpg

Both trucks are hooking hard with what appear to be "slide a links" ?
 
Top