Best Intake Manifold Gasket?????

2fast4u

PUMPING THAT IRON!
Just wondering if someone can shed the light about the best intake gasket i can find for my Typhoon. I need the kit immediately!! Ummm..I got a lil bit of blue smoke seeping from the back of my intake manifold. Along with oil seepage. So, iam pretty damn sure i have a blown intake manifold gasket which is making my engine run like shit. I heard that there is a new metal type gasket being used?? True? Both Napa and Autozone have gaskets with sealant in a kit(for the ends), instead of end gaskets/seals.
 

NecroWolf

lost marbles member
Re: Best Intake Manifold Gasket?????

that kit should be fine if you put the sealant on right. small block have used the same setup for a long time. there's a rope gasket you can put there but it sucks, rtv is the way to go
 

Raist103

Engine Killer, iPhone Killer, Lawnmower Killer
Re: Best Intake Manifold Gasket?????

just email mike hood he can get you the right one cheap and quick "tucker auto parts" vender on the board
 

Don W.

Stab it and steer it
Re: Best Intake Manifold Gasket?????

I did mine using the black RTV on the ends, no leaks. Just make sure everything is CLEAN and dry. Try to find the tightening sequence and torque. Otherwise I can send it to ya. (Not in front of me at the moment.) After torquing the bolts go have lunch, then come back and double check everything.
 

syclone1100

RUNNIN AND SELLIN
Re: Best Intake Manifold Gasket?????

Just order mine from Mike Hood at Tucker Auto Parts.. Here the part number and what come with it.. MS16154 - Includes upper plenum gasket, lower intake gaskets, a distributor gasket, and a small tube of silicone.

MS16154 = $39.99+ shipping...
 

2fast4u

PUMPING THAT IRON!
Re: Best Intake Manifold Gasket?????

syclone1100 said:
Just order mine from Mike Hood at Tucker Auto Parts.. Here the part number and what come with it.. MS16154 - Includes upper plenum gasket, lower intake gaskets, a distributor gasket, and a small tube of silicone.

MS16154 = $39.99+ shipping...

I called them today and Mike was gone. I left my # but no call back...hmmmm
 

Don W.

Stab it and steer it
Re: Best Intake Manifold Gasket?????

He'll get back, or call again. Very fair to deal with.
 
Top