sly dvl
Ya, it's got a Turbo
I've seen several posts about members and friends trucks being stolen so I thought I'd share a simple yet effective anti theft device; your cigarette lighter.
I've done this mod. for several customers and they love it, providing you don't use your lighter socket for anything.
Locate and cut the wires leading to your cig. lighter.
Locate the hot wire of your choice (ECM wire, Inj. Pwr. wire, Fuel Pump wire etc.) and cut it.
Now, run your "hot" wire through your cut cig. lighter plug.
Remove the heater coil from your lighter and solder in a piece of wire in it's place.
Now, as long as the cig. lighter is removed from the socket it will never start.
Insert the lighter into the socket, push it in and all works as it should.
You can even leave the lighter in the socket (for appearance purposes) as long as it's not pushed in.
You'll want to make sure the cig. lighter is a good snug fit into the socket though, since a hard launch or shift could "pop" it out.
I've done this mod. for several customers and they love it, providing you don't use your lighter socket for anything.
Locate and cut the wires leading to your cig. lighter.
Locate the hot wire of your choice (ECM wire, Inj. Pwr. wire, Fuel Pump wire etc.) and cut it.
Now, run your "hot" wire through your cut cig. lighter plug.
Remove the heater coil from your lighter and solder in a piece of wire in it's place.
Now, as long as the cig. lighter is removed from the socket it will never start.
Insert the lighter into the socket, push it in and all works as it should.
You can even leave the lighter in the socket (for appearance purposes) as long as it's not pushed in.
You'll want to make sure the cig. lighter is a good snug fit into the socket though, since a hard launch or shift could "pop" it out.