The Life and Time of Typhoon #2320

MikeRenz

not stock
Re: The Life and Time of Typhoon #2320

alwayscode390 said:
So, your down to the STI, #2320, and a Jimmy? ---
yup :tup: and the jimmy will be gone hopefully once and for all in the next 2 weeks or so. I've had it sold twice only to have it fall through for different reasons.
 

MikeRenz

not stock
Re: The Life and Time of Typhoon #2320

so i have spent some time on Typhoon #2320 recently. Nothing extraordinary, but for me it is. :lol:

started cleaning my frame and prepping for coilovers.
IMG_3588.jpg


IMG_3589.jpg



I'll most likely be rewelding these joints and smoothing them out so it looks nicer. Becuase that is very important.
IMG_3590.jpg




I have the drivers side control arms/axle/torsion bar/etc completely off so i can fully clean everything. Powdercoating is probably in the future for the parts.
IMG_3592.jpg



And then i began cleaning the passenger side of the frame. It's not coming as clean as easily...go figure. So i'll be using some more abrasives on that side to knock that spot rusting off.
IMG_3593.jpg


I have the upper arm off of the passenger side also.
IMG_3595.jpg

the ball joints on the pass side are possibly the originals and aren't playing as nicely as the drivers side did. But I look forward to having all this crap off so i can clean everything to the same level.

While i have the spindles off i'll be removing all of the ABS crap. And am contemplating using 2nd gen spindles. Oh i also have a 2nd gen front sway bar to slap on (once i have it fully clean)...and of course everything will get new bushings before being installed.
 

warmpancakes

New member
Re: The Life and Time of Typhoon #2320

If you dump the abs completely and swap to a non abs humb the wheel moves in a 16th of a inch or so
 

badmatt

boost = happy
Re: The Life and Time of Typhoon #2320

renz for rust removal use a flapdisc on a grinder! save you so much time and will give you one hell of a finish
 

MikeRenz

not stock
Re: The Life and Time of Typhoon #2320

badmatt said:
renz for rust removal use a flapdisc on a grinder! save you so much time and will give you one hell of a finish
yup! I'm just getting what i can off w/ a wire wheel...from there i'll break out the sanding/grinding. I don't want to go too crazy or i'll end up w/ a polished frame a month from now. :tup:
 

badmatt

boost = happy
Re: The Life and Time of Typhoon #2320

MikeRenz said:
yup! I'm just getting what i can off w/ a wire wheel...from there i'll break out the sanding/grinding. I don't want to go too crazy or i'll end up w/ a polished frame a month from now. :tup:


chrome frame?:rotf:
 

NecroWolf

lost marbles member
Re: The Life and Time of Typhoon #2320

MikeRenz said:
yup! I'm just getting what i can off w/ a wire wheel...from there i'll break out the sanding/grinding. I don't want to go too crazy or i'll end up w/ a polished frame a month from now. :tup:


go for it and i'll drop mine off after you're done
 

dgoodhue

BuSTeD 4.3
Re: The Life and Time of Typhoon #2320

MikeRenz said:
yup! I'm just getting what i can off w/ a wire wheel...from there i'll break out the sanding/grinding. I don't want to go too crazy or i'll end up w/ a polished frame 2 years from now. :tup:

fixed
 

Luke

Fish sticks SUCK !!!
Re: The Life and Time of Typhoon #2320

you working on your truck again? or just stop by to take a pic?
 

mattw

Active member
Re: The Life and Time of Typhoon #2320

Thats his 80e bolted up to the engine... He actually got something done...
 

SY2455

70's Veteran
Re: The Life and Time of Typhoon #2320

Mike this is a good write up. Have you done anything to her lately ?
 

MikeRenz

not stock
Re: The Life and Time of Typhoon #2320

i'm trying to remove the frame brace to make installing the xfer case easy...the rivets are fighting me though. I have them pretty much grinded away and was trying to air chisel/punching them out..but my ears/arms couldn't take it anymore. I prolly spent at least like 2 hrs on my back under the truck and it got to me. heh.
 

MikeRenz

not stock
Re: The Life and Time of Typhoon #2320

Figure i might as well update this thread...

For those unaware, a minor transformation was made on #2320:
http://www.syty.net/forums/showthread.php?t=77180

And as of recently, i loaded it up and brought it to it's new home / my new shop.

Avalanche tugged it home just fine...I even cleaned both vehicles for the occassion:
2320-Home1.jpg



Home and unloaded!
2320-Home2.jpg



ready to back into its new home:
2320-Home3.jpg



Home at last!
2320-Home4.jpg




Still nestled in bed a few nights later...just making sure its not having any night terrors:
2320-Home5.jpg



This past weekend i had my entire family up to visit and they all got to oogle the truck in all it's glory. My brother is also a motorhead and is building a Ford Ranger with a carb'd 350 and 700r4. I'm anxiously awaiting him to finish it so we can cruise / line them up. He'd ridden in the truck when i first bought it and was impressed with it then. But since it's been basically undriveable since then, he hadn't set foot in it for quite some time.

He thought the truck sounded nice and throaty with the exhaust off, and nice with it on. But he claims his truck will be way louder. I guess louder means it should be faster too? :dunno: I do think that turbos quiet down a motor too...so that helps.

I figured i might as well take him for a quick spin in the Ty so he'd know what he's up against. Well...of course i didn't go slowly with him in the truck. He was reaching for the passenger side brake pedal which i haven't yet installed. :lol: We did a short 30-100mph pull, prolly at 80%ish throttle. It pulled great, shifted perfect...not a hiccup. I was even surprised at how quick it got to 100mph. I've only been driving the Avalanche which is a far cry from quick....so at this point i'm a bit removed from the feeling of hard acceleration.

Pulled back into the driveway and parked it and he says "I knew it was quick but I wasn't expecting it to pull THAT hard" :lol: I'm thinking he finally believes me that he'll have no shot even with his lightweight lil ranger. :tup:
 

phoonTy

Truckless. For now.
Re: The Life and Time of Typhoon #2320

Your truck just sits right with those wheels. Tom and Dameon did a fantastic job with that truck for sure. :tup:
 

eviltwin

"junkyard syclone"
Re: The Life and Time of Typhoon #2320

I <3 those wheels. How about some video of this thing in action?
 
Top