Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

ViciousV6

400HP/550FTLB
1st Pass (a bit of water from some sprinklers.) Felt real good Only Running about 17.5-18.0 lbs of boost. Tried leaving on 10-11lbs of boost. Watch out for the radar detector goes flying into the back seat.

http://www.youtube.com/watch?v=t56QfnZKaDU

2nd Video : 2nd Gear to 3rd Gear pull!

http://www.youtube.com/watch?v=cauDHclv0Vs

3rd Video : BEST PASS! Chirping Tires, left on about 5-6lbs Launch!

http://www.youtube.com/watch?v=M-VUvCq6OlQ

Ralph
ViciousV6

Still need 1 more night to finalize the adjustments but its pretty close right now.
 

AZtyphoon

New member
Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's

Awesome videos. :tup: What do you think your 60ft's will be?
 

ViciousV6

400HP/550FTLB
Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's

AZtyphoon said:
Awesome videos. :tup: What do you think your 60ft's will be?

Without boost launching we were 1.7's - 1.6's . So hopefully we can get some 1.5's with the launches.

ViciousV6
 

AZtyphoon

New member
Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's

ViciousV6 said:
Without boost launching we were 1.7's - 1.6's . So hopefully we can get some 1.5's with the launches.

ViciousV6
It looks like you could easily pull 1.5's if it hooks.
 

JuStBlAzIN

Active member
Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

Your truck sound sweet. Keep it up.
 

Tooky

Serious about performance
Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

Great videos again. YouTube converted them to High Quality already so they're especially nice!!

Your truck sounds & revs strong as hell. Amazing you've had such good luck with the Aamco 700-R4 with all that streat beating! :D
 

skipztt

boost
Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

damn that thing hooks good
 

43t_ftw

Member
Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

lookin good!!
what is the part # for the rear QA1's you are running?
you have just the shocks and not full coilovers in the rear correct?
 

ViciousV6

400HP/550FTLB
Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

Now if your lowered in the rear, you can not use the stock QA1 replacement which was our original problem. The new Shocks are QA1 1915P they are 13" to 19". My truck with BelL-Tech rear lowered leafs and battle bars sits @ 16" center to center of mounting points. Bilsteins are 14" to 23" almost completely compacted.

When buying these shocks you must buy the Stud conversion to eyelet and T-bar kits.

From the video's they are working awesome.

Ralph
ViciousV6
 

NecroWolf

lost marbles member
Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

Re: Part II : ViciousV6 Tuning the Suspension, Adjusting Coilovers and Shocks Video's!

lets see it from outside the truck, those sound pretty good
 
Top