Battery relocate for TY (behind Rear Left tire) PICS

TYTILIDIE

METH HEAD
Though I never told anyone, I have always wanted to know if a battery could be relocated to the rear of the TY behind the driver side wheel. Well, it can be done. I have spent the last three evenings doing it and have probably one more to go. I will say that anyone who considers this as an option, take a big step back and THINK about it. I went through a crap load of metal trying to make brackets and stuff and kept realizing after the fact that it wasn't what I wanted. Even couldn't decide how I wanted the battery to sit. In short, I used an Optima red top because I thought I was going to mount it upside down but changed my mind. I have no idea if a stock battery will fit, I am pretty sure it will not. I made to where I can drop the battery down in an emergency but the easiest way to get it out is to jack up the truck and take off the wheel. All I have left to do is make some kind of tie down and a nice cover so the tire doesn't beat to hell. I had to take it for a drive last night because I was having withdrawals. I just used a tie down and called it good :lol: Going to make a nice tie down tonight.
 
Last edited:

MikeRenz

not stock
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

so you put it where the stock air compressor goes? what a revelation!
 

Norm

Donating Member
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

MikeRenz said:
so you put it where the stock air compressor goes? what a revelation!


:rotf: :rotf: :rotf:
 

TYTILIDIE

METH HEAD
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

Ugh, I knew I should have talked to you about this first.
 

mattw

Active member
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

I think thats a great place for the battery and I don't think that anyone else has done it. I was thinking that once I get my cladding made I will actually cut away that entire lower piece of the body to make plenty of room for a battery there.

Any pics?


-Matt
 

Ry368

one mile = 5280 feet
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

Sounds like a fun filled time brother.....what are going to do with the extra space in the engine bay?
 

DynaGlide

Ton-Eighty
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

This thread is nearly worthless without pics. ;)
 

TYTILIDIE

METH HEAD
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

mattw said:
I think thats a great place for the battery and I don't think that anyone else has done it. I was thinking that once I get my cladding made I will actually cut away that entire lower piece of the body to make plenty of room for a battery there.

Any pics?


-Matt

Thats what I thought. I know I have read some posts that mentioned people wondering if it could be done. So I thought I would be a bad ass and try it out :lol: As far as the extra space, not sure whats going in. I really did it because when I put my new set up on I may have to re-route some of the upper IC piping and thought it would be a hell of a lot easier with the battery out of the way. That and its one more thing I don't have to look at when I open the hood. Speaking of which, I'm dieing to come get that from you this weekend. Can't friggin wait. After Renz's comment, made me think this has been done several times or something. I searched and never found anything but speculation. If anyone knows who has done this or has pics Id love to see them. I'm just waiting for someone to say, oh why didn't you just buy the kit???!!! Id be PISSED :lol: I'll get some pics up soon.
 

MikeRenz

not stock
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

I was just giving you shit. It's been talked about for years, and i've wanted to make a tray to fit in there...just haven't gotten around to it yet. I'm glad you got it to work.
 

mildtowild

Custom Upholsterer
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

DSCF2549.jpg


some what similar under my s10. not what i would call "easy" to get to though.
 

TYTILIDIE

METH HEAD
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

Here are some pics I took. The only reason I didn't go with the tray type set up is because it would never have fit. Unless there is a way smaller battery with equal CCA I don't see how you would it. Any way, here are some pics I took:

This is the underneath shot. On the left you can see that the metal sq tubing is removable. As are the pieces of angle iron on the right. Try and keep in mind I am not finished yet. Need to make covers then re-paint everything.



Here is a pic of where I decided to ground the battery



Another pic in that area



Angle iron brackets on the frame side were made removable as well to drop the battery for emergencies



Bracket holding the battery down from the top



This is what it looks like sitting in the wheel well



Well thats it. Only took me 12 hours of my life :lol: It would be nice if someone could come up with something better. I don't like how this turned out at all, well, except for the fact that its where I want it I guess. Good luck to anyone who tries it, you've got your work cut out for sure.
 

TYTILIDIE

METH HEAD
Re: Well, its finally over!!!!

Re: Well, its finally over!!!!

Just wanted to add, keep in mind also that I wanted this to be set up to where I could jump the truck with out pulling the battery down as well. I am also think about making the angle iron brackets a one piece deal and also having a plate that it would sit on to prevent the brackets from trying to dig in to the battery. I plan on checking for wear marks everyday for the next few weeks first though.
 

Chest Rockwell

Active member
Re: Battery relocate for TY (behind Rear Left tire) PICS

I was thinking about doing this to mine, just haven't made the time yet. Looks good, I'll keep checking for new pictures.
 

twin74s

Member
Re: Battery relocate for TY (behind Rear Left tire) PICS

hmm. I like but dislike. Good job on doing something that had only been talked about. Like you said clean up the brackets a little and it'd be awesome. Maybe someone can make one that has some type of latch or something to make it easy to get out?
 

mattw

Active member
Re: Battery relocate for TY (behind Rear Left tire) PICS

Just looked more closely at your pics and I noticed that the bracket bolts to both the body and the frame. I bet there is more movement between the two than you think. I may have to try this now but I think I will try to hang it just off the frame.


-Matt
 

TYTILIDIE

METH HEAD
Re: Battery relocate for TY (behind Rear Left tire) PICS

The movement wont be an issue since the brackets on the the frame are NOT connected to the ones on the body. Also, the battery is not held in super tight so there is slight room for play. However, it is hard to move when the brackets are off :lol: Hell, I had to push to get it to squeeze in there. This is why any kind of holders or boxes just wont work. The only thing that fits, is the battery. Now like I said before, if someone found a battery that was smaller in every way then it would be great. When I get really bored I will re-do the brackets but for now I just need to catch up on some sleep :lol:
 
Top