FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
I have a brand new custom fabbed aluminum one piece rear main seal deep sump oil pan - it is from CKeith from his GP from a few years back. Never used it.

I have a pair of brand new custom fabbed aluminum center bolt valve covers with the weld on oil fill bung and cap and two breather fittings and two sheets of gasket material to make your own gaskets - they are also from CKeith from another GP from a few years back. Never used - brand new in the box.

Neither of these items will fit my bowtie motor build so I can't use them.

RPM sells their oil pans for $650.
RPM sells their valve covers for $309.
RPM sells their weld on oil fill bung/cap for $50.
RPM sells their valve cover gaskets for $28.
I'll throw in the two breather bungs for free.

I have pictures of everything for those interested. Would like to sell it all as a matching set if possible.

Make a reasonable offer and it's all yours. I can ship it all via UPS easily.
 
Last edited:

jpalmer

New member
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

would you take 200 for the valve covers + shipping+ pp
 

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

Everything added up would be around $375 from RPM - can't do that low - how about $300 + shipping + PP ?

They are brand new, too.

That's at least a $75 savings.
 

NecroWolf

lost marbles member
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

i'd go 275 all for the valve cover set up if they are the taller ones
 

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

I can measure the height of the valve covers tonight for ya and let you know tomorrow.
 

NecroWolf

lost marbles member
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

if i buy fabed valve covers i need about an inch more height to clear my rockers
 

jpalmer

New member
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

a little rich for my blood i need a trans right now
 

1madgumby

New member
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

Hey I have A set of these valve cover & the gasket keep coming out, will not stay in place. Using the blue felpro rubber gaskets. Almost seem like they shrink or somthing. what gaskets do you use with them.

Aj.
 

NecroWolf

lost marbles member
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

gasket glue is a stronger... or get some right stuff rtv, that is the nastiest stuff i have ever used.
 

NecroWolf

lost marbles member
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

right stuff link that has to be the nastiest stickiest rtv type stuff i have ever used, i think if you allowed cure time it could be used in place of a head gasket on a n/a motor.....make sure your valve cover is clean, hit it with some brake cleaner smear a little of that crap around your gasket seat and attach the gasket and let dry. if you were careful you could skip the gasket. it's designed to make import valve cover gaskets
 

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

The valve covers are a hair under 3" tall - 2 7/8" to be exact. The gasket flanges are 1/2" wide all the way around - plenty of surface area to glue the gasket to. I have them here at my desk at work today so they are ready to ship if you still want them.
 

NecroWolf

lost marbles member
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

you neasured them flat on the desk top to bottom, so the flange is incorparated into the side panels? can i get an underside shot? i'm just ensuring i got the right measurement to match. one way i measure it's 7/8 taller, the other way it's 1/2. either way it's enough, just want to verif.
 

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

Yes - I measured them laying flat on my desk - it was 2 7/8". I don't have any pics of their underside handy. I left the valve covers at work and my camera is home so I can't get pics to you until Monday. Let me know if you really need the pics.
 

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

Valve Covers sold to NecroWolf.

Oil pan still available. BUMP!!
 

Windedv6

Ty n 10s
Re: FS: Custom Fabbed Aluminum Oil Pan & Valve Covers

Hey I have A set of these valve cover & the gasket keep coming out, will not stay in place. Using the blue felpro rubber gaskets. Almost seem like they shrink or somthing. what gaskets do you use with them.

Aj.

I use cork gaskets on all my Aluminum covers. Especially those the have no edge lip.

John
 
Top