Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

mrweelr

New member
I'm in the process of installing a George Blake 80e in my Syclone and I guess I need to get the rear driveshaft shortened. I figured now might be a good time to upgrade to a lighter carbon fiber or aluminum shaft. Does anyone already make a correct-length shaft for our trucks running the 80e that will just bolt right in? I don't feel like taking this stock one down to the machine-shop and screwing around with it.
 

denny

Active member
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

x3 if the price is right!
 

Windedv6

Ty n 10s
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

I have a brand new never installed PST Carbon Fiber shaft that is for a Sy 4L80e. Paid $900. I will sell for $800 plus shipping.

John
 

crazykaese

91ProtoTy/IndyPaceTribute & Sawzall Master
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

I also have a brand new carbon fiber driveshaft for a Typhoon with 700R4 that I will sell for the same price.
 

mrweelr

New member
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

Are these much lighter than stock? How many lb. ft can the CF ones handle before snapping?
 

jwaller

Evil Genius/SyTy Guru
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

I sell the PST shafts direct and stock them. I can sell them to you cheaper than if you call and ask for them. I've done GP's for years and if you look at my vendors sections you'll see more info on them. please pm me if interested as I dont check this site much anymore.
 

mrweelr

New member
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

Thanks John. I will most likely order one of these from you very soon.
 

George Blake

DONATING MEMBER
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

For anyone ordering one of these from John for the 80e conversions, take whatever your stock REAR driveshaft is from the TIP of the slip yoke to the middle of the U-joint at the back and SUBTRACT 3.25" from it. That will be what you need for the 80e. I can't remember what it is for the sy vs the ty. I've learned NOT to go from U-joint to U-joint because there are a couple different types of 32 spline yokes and their length varies considerably. This way, no matter which they use, you'll be in good shape.
 

sytydvr

New member
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

so all shafts sy or ty are 32 spline yokes? i thought there are 27 on sy and 32 on ty rear driveshafts?
 

George Blake

DONATING MEMBER
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

so all shafts sy or ty are 32 spline yokes? i thought there are 27 on sy and 32 on ty rear driveshafts?

No. That's why there would be 4 part numbers possibly more. I figure 6. The 32 spline case has a longer tail shaft so it makes it's own length as well.
32 spline Ty stock.
32 spline Ty 80e.
27 spline Sy stock.
27 spline Sy 80e.
27 spline Sy that has been upgraded to the 32 spline case with a 700r4.
27 spline Sy that has been upgraded to the 32 spline case with a 4L80e.
 

Quickstop [UK]

Combating adversyty.
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

According to this thread, the driveshafts on a syclone need to be 3.5" shorter.

Is this the case for the Typhoon shaft as well? Where is the 3.25" coming from?

If using the stock Ty driveshaft, how much does it need to be shortened by to work with the 4L80E I got from you George?

Thanks
 

sparkwire

Donating Member
Re: Shortened Driveshaft for 80e - Anyone sell a correct-length CF or AL one?

On my truck, measured from the tip to tip where the cross goes in the DS it's 30.25" for the ty. I had George get mine . Of course it depends on the yoke used
 
Top