new AFPR and it is hard to start in the AM?

Osmosis

New member
I just installed an AFPR from RPM brand new. I set my fuel psi @ 47psi. When I come out to start it in the am, it takes 10 tries to turn it over? With my stock fuel psi regulator, 2 tries at most. What gives. It only acts like this in the morning or when it's really cold....ever since I put the new fuel psi regulator in:squint::(
 

CLONE

New member
Re: new AFPR and it is hard to start in the AM?

It should start on the first attempt. Assuming you are setting the FP properly and need 47psi here is how I would troubleshoot. I would start by checking for leaks. Then I would put a fuel pressure gauge on the truck and watch it while the system primes when you place the ignition key in the on position. If your fuel pressure isn't going up to 47psi when it primes, then you need to figure out if it is a pump, line, filter or regulator problem.
 

Osmosis

New member
Re: new AFPR and it is hard to start in the AM?

I decreased my fuel pressure to 45. I actually decreased the fuel psi to 40 prior to starting the truck. When i was increasing the fuel psi, I could actually hear the idle drop or change once I got above 46psi? I dropped the fuel psi to 45 and changed the relay. This morning, the truck started on the first try, however, it was not very cold out and it seems the hard starting has always been when its really cold out. We will see, as for now, problem seems to be fixed due to decreasing my fuel psi to 45psi and replacing the fuel pump relay.
 

Slowcone

New member
Re: new AFPR and it is hard to start in the AM?

take the vac line off, plug it with something then adjust fuel pressure to about 40-43. it will drop after you reconnect the vac line. my fp sits at 38psi at idle.
 

Osmosis

New member
Re: new AFPR and it is hard to start in the AM?

Sorry, I should have been more specific. I adjusted my fuel psi as directed by the GM manual. I disconnected the vacume hose, plugged it and then adjusted the pressure to 45. I initally had the fuel psi set @ 47psi with vacume line plugged.:tup:
 
Top