1993 Typhoon $7500.00 firm

2kwik4u

Resident slow guy
Re: 1993 Typhoon $7500.00 firm

Wish I had the cashola, or a place to work on it. Good luck with the sale there George. I certainly hope it goes to a home that will appreciate (and continue) the work put into it thusfar instead of just running the numbers on the sum of the parts.
 

Syclone#892

Member
Re: 1993 Typhoon $7500.00 firm

Good Luck Willie on possibly buying this one, I would love to jump on this if I was in the position to do so.

What happened to Jimmys post in this thread?
---End Quote---
HA. :haha: That Ty you just parted was way beyond "decent"'not running decent,but a good solid foundation to build a nice rust free truck.

Why does it always have to be aboot $ ?

Jimmy I think you should make some RIP posts of these good trucks getting parted out because this is a business now not a community of people who love these trucks just people seeing dollar signs.

Good Luck George hopefully there wont be anymore tire kickers for ya, defiantly sorry to hear you have to get rid of it though.
 

s_blazin

Donating Member
Re: 1993 Typhoon $7500.00 firm

wow you guys really have corrosion issues out there, i would still buy it if it was closer
 

George Blake

DONATING MEMBER
Re: 1993 Typhoon $7500.00 firm

I thought it would be an easy sale considering what it is. It comes with a new floor pan for that side and a polyurethane body mount kit. I just don't have the time to finish it. T-Bone kinda rubbed a spot on the cladding that had a crack in it and said "I have an all billet 700 in my prototype" so I'll keep it and Jimmy said we could do the whole 4L80e installed for $4500. I then priced him the parts in the 80e (controller,converter,trans,install kit, driveshafts, etc) in THIS truck and was just amazed. I'm not DYING to sell it. Please guys, be serious when you go through all that effort to go look at a truck.
This truck is driven EVERY DAY. Not a garage queen.
 

warmpancakes

New member
Re: 1993 Typhoon $7500.00 firm

can you throw up some pics of the body mount area? im trying to determine how long it would take to repair would be a better daily than the dodge a/c still on it?
 

George Blake

DONATING MEMBER
Re: 1993 Typhoon $7500.00 firm

100_7730.sized.jpg

That was what was popping when we went on the test drive.
The a/c is new:
100_7734.jpg

Sorry for the big pic. It's so you can see the accumulator and compressor better.
System was disassembled, flushed, reassembled with new screen filter and set up for 134A and charged. I did a LOT to this thing. Like I said, it was meant to be a daily driver.
 

George Blake

DONATING MEMBER
Re: 1993 Typhoon $7500.00 firm

That's plastic. The battery is mounted in the back to make room and I used that plastic box to bring the line in and provide a mount for the battery+ for the starter and a charge point for the alternator. The alternator is the big amperage (160 or 170) cadillac alternator. I upgraded the wire to a diameter that was 3 times larger than stock, made a brack for the back of the alternator to mount it in the stock location. It just BARELY fits. Like it was meant to be there. It tightens the tensioner to max. It has the high torque 454 starter on it. It is 6 months old. I replaced the original starter with it and ran new wiring. At the time of all of this I really meant to keep the thing.
The black box in front of that is the freightliner relay I'm using for the fans. I smoked TWO of the fan controllers from Flex a Lite. (JUNK). No problems since doing this. The smaller relay is what comes from the old CAC setup. I did this to have an extra layer of protection for the stock wiring. After burning TWO of the Flex a Lite craptrollers, I didn't want to take any chances.
 

BigBadSmoosh

Picking fights on I-65 since 2013
Re: 1993 Typhoon $7500.00 firm

cool, Im going to have to ask the wife (read beg and pleade into that)

just an fyi..

I've replaced that very spot on another s-series in the past (2wd v8 s10 I had) it wasn't impossible to replace but it was difficult because the frame is sorta in the way. :tup:

in other words the repairs can be done with a mig welder and alot of cutting/fitting/welding.
 

warmpancakes

New member
Re: 1993 Typhoon $7500.00 firm

just an fyi..

I've replaced that very spot on another s-series in the past (2wd v8 s10 I had) it wasn't impossible to replace but it was difficult because the frame is sorta in the way. :tup:

in other words the repairs can be done with a mig welder and alot of cutting/fitting/welding.


Thats a gravy repair I was worried it strated its way up the pillar
 

George Blake

DONATING MEMBER
Re: 1993 Typhoon $7500.00 firm

Yeah. When I did the other side, I was lucky because the exhaust was out of the way.
If I were to do the drivers side, I'd take the front prop off. The ONLY thing I don't have is the actual "box" for the mount. I have the floor pan.
http://www.lmctruck.com/icatalog/cst/full.aspx?Page=40
Part#2 on the chart. I bent up my own box for the other side and welded it in.
 

warmpancakes

New member
Re: 1993 Typhoon $7500.00 firm

I do have a 2 door 4x4 blazer body shell thats rust free, just has a hole in the block and is stripped for scrap I could swaz all that area out if you decide to keep it
 

SY2932

Administrator
Re: 1993 Typhoon $7500.00 firm

I'm not DYING to sell it. Please guys, be serious when you go through all that effort to go look at a truck.

Yep, don't just give it away! The sum of the parts are worth more that you are asking! Oh :bday: BTW :D!
 

George Blake

DONATING MEMBER
Re: 1993 Typhoon $7500.00 firm

Guys, I'm not parting it out. Quit filling my PM box with "I will trade you an alternator and $50 for your 170." It's going AS IS. That alternator alone was just over $300 with shipping. It's just insulting at this point.
 
Top