Recent content by rhaley

  1. R

    Spark Plug Problem

    Brian, I believe we have discussed this before. They are always white with no difference from plug to plug. There seems to be white film on them that looks like very thin white paint and there is no fly poop. If you wouldn't mind, I can send you some Speedpro runs to look at when it is running...
  2. R

    Spark Plug Problem

    Hello group, I have had an ongoing problem since I had my engine built. The problem is spark plugs, I have tried Delco R43LTS, R42LTS, NGK TR5 & TR6, and Autolite 104 and they all run great until I hit 15# boost. At 15# and higher the engine cuts out and I get a lot of backfiring. Every time I...
  3. R

    FAST-SP knock retard

    Ron: how many jets you running on alky? Size? I'm using single with a NOS "40". I haven't tested much with it, as I'm not yet encountering knock. Guess I'm just not trying hard enuff. Roland, I have no idea on jet size. I am running SMC's standard Buick kit with one nozzle. If you want some...
  4. R

    FAST-SP knock retard

    Nope, haven't. Just wanted to make sure we were comparing apples to apples here, cuz the heads make a HUGE difference. 91 octane does suck. Have both of you verified your exact timing advance of FAST vs balancer reading? Yes I have Brian, piston stop to verify 0* and I put a mark...
  5. R

    FAST-SP knock retard

    Roland, I phrased my question wrong. I have the original knock sensor, I meant ESC module when I asked about the KR sensor plugged into the SP harness. I can run more boost when the weather is cooler, it gets over 100* here and the air is very thin at 5000 ft. I would guess that the additional...
  6. R

    FAST-SP knock retard

    Brian, have you ever used 91 octane without xylene or alky injection? I am running McCoy's heads. I am also at 5000 ft. elevation so 20# equivalent at sea level requires me to actually boost 22.5# because atmosphere here is (-2.5#).
  7. R

    FAST-SP knock retard

    Roland, i assume you have a KR module plugged into your SP wiring harness? I have a very similar engine build and with 91 octane and my alky injection turned off, I can only run 15# boost @20 degrees timing before I start seeing KR. With the alky on, I can go to about 21# before I see KR.
Top