I have a 1991 chevy blazer 4x4 s10 tahoe and the rear end sits a couple
three inches lower than the front, i can see no broken leafs so I am
guessing the metal is maybe tired? Is there a way to get my butt back up
in the air on the cheap, the dealer here wants 500 canadian just for the
parts...
to heck with it, it looks like someone has previously tried to remove the exhaust manifold since the bolts look and feel pretty rounded, so i removed all of the broken parts of the tube and threaded a self threading bolt straight down it to stop the flow of oil, so i'll have to watch my oil...
What you describe sounds relatively easy Ronnie, I am able to turn the old tube from side to side so I assume its not rusted in place and there is plenty to grab ahold of with vice grips, do you think I will be able to locate the block hole with the new tube without removing the manifold which...
Again, please pardon my ignorance on basic mechanics but can someone explain to me exactly how the tube is extracted and the new on inserted, will I need a certain tool or can it be hand fed in and simply pulled out, is there a seal and if I try to push it in to place without removing the...
i apologize if i'm in the wrong place for this but thought someone here could offer me some advice.... I have a 91 blazer 4.3liter that has a broken off dipstick tube, I removed the top portion of broken tube and I can't seem to locate where the bottom portion goes to as it vanishes under the...