Search results

Thank you

So I sent my injectors out to get cleaned and flow checked, all good. They are Ford blue tops, they all flowed about 37 Lbs. I jump the fuel pump wire and the Syclone instantly started and runs smooth 😎 Now , for the fuel pump relay in the engine compartment, its outbound of the brake booster...

Thanks for this info. Much appreciated.

Alright, so I jumped the fuel pump terminal and the pump turns on & has pressure, Problem I am having is the engine is not getting fuel. I let the truck sit way too long. That's why I needed to install a new gas tank ,fuel pump and sending unit.. I sprayed WD 40 onto the throttle body and...

Thx guys. Your all the best.

Thank you. So I would need to supply 12 volts to that connector to see if my fuel pump turns on, correct?

Hey guys, I can’t remember where or what terminal you can jump to get power to the electric fuel pump. Can anyone post a pic ? Thank you

The GTA wheels did not rub, I just put them on for drag racing because they are lighter IIRC, 3 LBS than stock wheels

The back fits fine , the fronts stick out a bit too much.

Thx

Hey guys, I need to clean my injectors, been sitting too long. What is the best /easiest way to clean the injectors? Thank you.

I am doing the same except it will be for my Camaro Post some pics.

Thx, I forgot if our rear axles are a 7.5" ?

Was wondering if a 98 Carmaro 7.5" posi unit will fit a stock Sy rear end?

Thank you.

Nice runs!!! What happened to the trans?

Hi guys, I would like to get a stock style Syclone alternator for my Camaro and was wondering who you guys recommend to get one from? Not sure what model it is called & the mounting ears are located where, centered? Thanks for any help.:tup:

Re: Stock Turbo Syclone first passes No knock in first & second, sounds like you can run a bit more timing, that will help a lot, but don't go too aggressive, just a little at a time. Cooling down between runs helps tremendously. Good luck:tup:

Re: Stock Turbo Syclone first passes Nice runs! I do not think the intake temps are slowing you down that much, your running E-85, is it knocking @ all? If not put some more timing into it.

Re: Tuning Help Please Yep, Rob knows it pretty well!:tup::tup: