Search results

Keep us posted on how this works out for you lots of good info in this post regarding the instrument cluster and HVAC controls.

….About the steering wheel

Sent you a message

Just a quick update. I did the test letting the FP pressurize the lines then giving the starter a quick blip to turn it over without starting and then released the ignition switch and I could hear the FP re-pressurizing. Bottom line is that I don't think the no-start condition was related to the...

I appreciate the extra info. My fuel pump is on a separate racetronix power ckt. harness and it does spin up when I turn the key to the on position and once pressurizes the fuel rail it stops. That’s pretty consistent. I can do that test to see what happens. Basically activate the starter after...

One other note was that I did not mess with any electrical wires this morning, just the three vacuum lines at their end points which were not close to any wiring. Thanks for everyone’s feedback regarding this post, it was appreciated.

Had a good morning today. I pulled the charcoal canister and checked the line with the mityvac and everything looked good with vacuum against the check valve. I replaced that line and then pulled the cruise control line which is on a different check valve circuit and when I tested it I couldn’t...

Yes agree, the wires are all getting pretty brittle. I am going to do some closer inspection of the wires and a few additional tests tomorrow using my fuel pressure tester and mityvac. Although the issue could be electrical even though I have cranked the motor over repeatedly I don’t smell any...

Hey there, I have a weird puzzle on my hands and wanted to get some input. Had my truck since 98 and this past year it started running rough so parked in the garage and only driven for short distances. Cruise had stopped working and the ac controls didn’t hiss any more and stopped working...

Can anyone tell me how the cruise control electrical circuit is fused. It’s not listed on the fuse block and was wondering if it’s a fusible link instead? Any info would be appreciated thanks jeffre

That diagram helps a ton wildphil, thanks for sharing that info!! looks like the two things I am having trouble with are both on the same vacuum circuit on the other side of the check valve. It’s almost certain that the issues are common to the lack of vacuum. I did a quick visual on all of my...

i noticed this past winter that my air mix controls are not working. None of the typical vacuum noises I would normally hear. Basically stuck on defrost which worked ok for the colder months. This also affects the ability to turn on the AC as the switch has no affect on activating the...

Pm to you

Re: FS SY1201 St.Louis area Hey guys my son has expressed interest in wanting to own the truck at some point in the future so I have decided to hold onto the truck for now. At first my wife was yelling at me to sell the truck and then yelling at me because I was selling the truck. At any rate...

No longer for sale. Thanks

Re: Focus ST That's familiar as my Sy isn't running as well as it should either, and my Mk7 GTI is far faster right now even in stock trim. Just a simple stage 1 tune in the GTI and you are at 316hp and 381 ft lbs of torque. Pretty amazing gains for a tune. Unlike the Sy though its better from...

Hi, I was talking with Mike from Race Proven Motors about a syclone shifter cable and although he did not have any, he indicated that you probably would? I checked out your website and found the item in question but was wondering if you had any in stock to order before I place an order? I did...

Re: Wtb Sy trailer hitch Thanks for the response and feedback folks. I will send pm's.

I know that back in the day there were some examples. Not looking to tow anything just want to hang a hitch style bike rack off the back. I have a bed rack but once it gets cold messing with the tonneau is a bear. Let me know if you have one you want to part with. Thanks