ghettosled
SYTY SUPERSTORE
Re: About to give up
Erik,
you are on my list of people to call back. Just been busy and my desk has a stack of numbers to call back. Please understand that some days i do not take phone calls. Doesnt matter who it is (well my wife is the exception) I need to get stuff done, and if i take phone calls my day becomes totally unproductive. I have people who are qualified to answer questions, and schedule appointments so your call is not ignored. Also email is a great way of asking questions and getting a quick response, here i am 10pm doing just that.
Anyways, lets set some facts straight.
3 years ago i sold you a chip for $350 (not $450) per your invoice. It was a chip that was to be calibrated for your exact mods, not a one size fits all tune. So in fact it is a custom tune, but not a dyno tuned chip. I have never once promised anyone this style chip is "perfect" but for 95% of the people it gets you close enough. You have sent me DM files, and they look fine. A chip either works or it doesn't. Obviously it works, and runs fine just lacks power up top. If your AFR was way off, your commanded timing way off, or you had severe knock then ok... lets address the tune.. But nothing leads me to believe the chip is at fault. A datamaster file does not look "good" or "close" when you have a bad tune or chip. Sure a custom ostich or emulator tune can't hurt but in this case it's not the reason for your problem, and its not why you are lacking 150hp. Your timing is spot on per the ecu, making plenty of boost and your afr is close enough (especially since you don't have significant knock)
The solution is simple, my shop is 2 hours away from you. When you feel like having a qualified person work on your truck or figure out your other problem(s) then let me know. My shop rate is $85/hr.
I stopped feeling sorry for people years ago when i was "too expensive", "too backed up", "too far away" or "my best friend builds race cars and he is helping me for free". I'm here to provide parts, knowledge and technical support to a certain extent. If you want something that is guaranteed to perform i need the truck in my hands. simple as that. I am not a magician that can solve everyone's problem over the phone.
Sure i have had my fair share of syty gremlins, but none that have stumped me for months yet alone years especially with a stock computer.
Erik,
you are on my list of people to call back. Just been busy and my desk has a stack of numbers to call back. Please understand that some days i do not take phone calls. Doesnt matter who it is (well my wife is the exception) I need to get stuff done, and if i take phone calls my day becomes totally unproductive. I have people who are qualified to answer questions, and schedule appointments so your call is not ignored. Also email is a great way of asking questions and getting a quick response, here i am 10pm doing just that.
Anyways, lets set some facts straight.
3 years ago i sold you a chip for $350 (not $450) per your invoice. It was a chip that was to be calibrated for your exact mods, not a one size fits all tune. So in fact it is a custom tune, but not a dyno tuned chip. I have never once promised anyone this style chip is "perfect" but for 95% of the people it gets you close enough. You have sent me DM files, and they look fine. A chip either works or it doesn't. Obviously it works, and runs fine just lacks power up top. If your AFR was way off, your commanded timing way off, or you had severe knock then ok... lets address the tune.. But nothing leads me to believe the chip is at fault. A datamaster file does not look "good" or "close" when you have a bad tune or chip. Sure a custom ostich or emulator tune can't hurt but in this case it's not the reason for your problem, and its not why you are lacking 150hp. Your timing is spot on per the ecu, making plenty of boost and your afr is close enough (especially since you don't have significant knock)
The solution is simple, my shop is 2 hours away from you. When you feel like having a qualified person work on your truck or figure out your other problem(s) then let me know. My shop rate is $85/hr.
I stopped feeling sorry for people years ago when i was "too expensive", "too backed up", "too far away" or "my best friend builds race cars and he is helping me for free". I'm here to provide parts, knowledge and technical support to a certain extent. If you want something that is guaranteed to perform i need the truck in my hands. simple as that. I am not a magician that can solve everyone's problem over the phone.
Sure i have had my fair share of syty gremlins, but none that have stumped me for months yet alone years especially with a stock computer.